Center link 68 chevy
 

I have a 68 chevy half ton 2wd. I have all 76 front end parts except for the control arms they are original. The 68 center link does not fit the 76 idler and pitman arm. These are a tapered fit. Im just wondering if the center link could be drilled out to fit the 76 parts. If not then would a 76 center link be too long or short or would that work
Thanks
Derek

Re: Center link 68 chevy
 

What year spindle are you using?
Match your tie rods and other associated steering parts to your spindles.
That's the easiest.

Re: Center link 68 chevy
 

You will need the center link to match the spindles/tie rods. The other option is a billet tie rod adapter sleeve that has the early smaller threads on one side and larger 73 up threads on the outside.

I would imagine you could drill the center link if you could find the proper size tapered end mill but the first two options are cheaper than a good tapered end mill if one even exists for that size/angle taper.

Re: Center link 68 chevy
 

Thanks alot now I can get to work:metal:

Re: Center link 68 chevy
 

I believe the center links changed in 73 (with all pickups having disc brakes, Thank God!!!). 73-79 center links might work...I will do some digging and report back, unless there's another expert... :D

Re: Center link 68 chevy
 

Center link change on the 71-72 trucks and then again on the 73-87 trucks.
Posted via Mobile Device

Re: Center link 68 chevy
 

I ordered a 76 center link to match my the year of all my other steering parts so hopefully it all works

You should be fine!!!

Where did you order it from??? A used one???

I hadn't heard of anyone making them, except O.E., since they have no joints in them, and don't wear out, unless crashed....

Re: Center link 68 chevy
 

I ordered it fom rare parts inc. Its a place that like oreilys and advance auto use. I ordered a control arm from them and it worked nicely. They are reasonably priced too.