new bagged 79 swb project
Got this in a trade deal couple weeks ago, decided to drive it for a few days and figure out what i wanted to change.
the short list of change......almost EVERYTHING. http://imageshack.us/a/img706/8730/20130511113050.jpg http://imageshack.us/a/img708/2744/20130511113144.jpg http://imageshack.us/a/img812/8935/20130511113106.jpg my "plan" is to have a very clean driver, few subtle custom touches to clean things up... nothing too exotic besides stance and wheels on the outside. right now the 350 is staying, a 700r4 is goin behind that... eventually an ls motor will find its way in place. the interior is where the big changes will take place... but more on that one later.... first things first.... needed to get it down to a more respectable altitude... also wanted to center up the front wheel and hopefully gain clearance to keep the stock ac box with the new 22's frameZ.. 3" up, 1.75" forward http://imageshack.us/a/img9/3091/20130523190222.jpg http://imageshack.us/a/img856/4986/20130531125931.jpg http://imageshack.us/a/img812/212/20130531125803.jpg back on the ground to see what else needs done... frame rails are now 5/8" off the ground... BUT i havent touched the rear yet bag mounts yet... the diff still has 3" till it hits the existing notch layed out http://imageshack.us/a/img716/6471/20130531125646.jpg and with the stock rollers... i have 1/4" to the blower motor http://imageshack.us/a/img15/7420/20130531125922.jpg and here is a lil teaser for the interior plan.... not the typical impala swap http://imageshack.us/a/img4/3669/20130531125825.jpg http://imageshack.us/a/img826/9816/20130531125845.jpg |
Re: new bagged 79 swb project
cool build man. Will you be keeping the stock clip up front? Looks nice.
|
Re: new bagged 79 swb project
im keeping the 79 clip... everything will be going back to chrome vs the rattlecan black. im thinkin its gonna get a back bumper too. i think the only things gettin shaved will be the emblems, stake pockets, and gate handle. the gas filler door will access for air and battery.
|
Re: new bagged 79 swb project
nice truck....I'm likin' the dash...
|
Re: new bagged 79 swb project
Cool man. I was hoping you would be keeping it.
|
Re: new bagged 79 swb project
the ups truck showed up... now i can figure out the next step since im not guessing on where the tires are gonna be.
im happy with the front wheel relocation... http://imageshack.us/a/img707/7730/20130531173510.jpg and the rear too http://imageshack.us/a/img824/482/20130531173107.jpg |
Re: new bagged 79 swb project
one of the major things i didnt like were these cupped lower arms... they pinched the bag AND rubbed the bags prettymuch all the time. they will give up the cross shafts and the bj area cuz im just bein lazy vs machining them
http://imageshack.us/a/img835/4195/20130602165237.jpg maybe i will have this pile of stuff tacked together by the end of the day... still need to disect the old arms and clean stuff up... http://imageshack.us/a/img96/4417/20130602165335.jpg they work out to be a 2" drop and correct all the bag angles at ride height... made out of 1 5/8 .120 dom, the bushing sleaves were just some stuff laying around that was close enough for a finish machine pass... they will be plated on the bottom with P/O .200 plate |
Re: new bagged 79 swb project
finally got a lil time today... got a decent start on my lower arms...
http://imageshack.us/a/img826/5482/20130604183005.jpg http://imageshack.us/a/img812/9948/20130604183101.jpg http://imageshack.us/a/img856/989/20130604183206.jpg besides the cross shaft... this little section is all i used from the old arms http://imageshack.us/a/img37/1164/20130604183136.jpg |
Re: new bagged 79 swb project
What's up dude? I see you're still alive and doing bad azz work as usual!
|
Re: new bagged 79 swb project
still around... pretty much only working on my own stuff if i can help it these days.
|
Re: new bagged 79 swb project
Have any cabs left? :lol:
|
Re: new bagged 79 swb project
i could prob scrounge up somethin.... i am toyin with idea of doin a TT dmax in this.... you prob got somethin just layin around since its not your brand
|
Re: new bagged 79 swb project
Sorry man, no dmax stuff layin around here. 72duraburb does though. :lol:
|
Re: new bagged 79 swb project
im just toying with idea.... i can do a whole lotta ls motor for the money to do a dmax
|
Re: new bagged 79 swb project
Yes you sure can.
Posted via Mobile Device |
Re: new bagged 79 swb project
no kid or gf tonight, so i managed to almost wrap up my lowers... hopefully i can get them test fit and get started on my new uppers my next "shop day"
a little heat n beat fitting http://imageshack.us/a/img62/3986/20130607005721.jpg lower plates on http://imageshack.us/a/img59/6384/20130607010603.jpg couple more parts to fit and these are done http://imageshack.us/a/img90/612/20130607014958.jpg notice the rolled tube brace... you can see what i have in mind for the uppers. i really plan to keep the uppers pretty simple, i kinda got carried away on the lowers :jest: |
Re: new bagged 79 swb project
after some shock mounting bungs and future way to mount a sway bar.... lower arms are 99% finished... need to mount them and mark for the bag mounting... then give em to my neighbor the powder coater once i get the uppers made.
http://imageshack.us/a/img7/6691/20130609002144.jpg http://imageshack.us/a/img46/2185/20130609002205.jpg think I figured out the color choice.... lets just say its probably gonna be an aquired taste for most :metal: |
Re: new bagged 79 swb project
great looking work!!!!
|
Re: new bagged 79 swb project
pretty sweet arms....
|
Re: new bagged 79 swb project
finally got some more time to work on my upper arms. made these 3/4 longer than stock since the truck had 1" of alignment shims on top of the spacers... wasnt much thread stickin out the lock nuts.
where the truck sat before was binding on the upper bj, so I came up with the mounting angle by just mocking everything up with my dropped arms, bag compressed all the way and went back just before the upper bj binds. keep in mind i still have stock spindles on the truck, and I wanted to make sure it lays frame now...so should i decide to go bigger rollers, drop spindles are all that will be needed to keep it laying frame. pix... more later tonight if i get around to mocking everything up :metal: all the fabbed up parts layed out.. http://imageshack.us/a/img521/7883/ulqe.jpg setting up a quicky jig http://imageshack.us/a/img15/7352/5gmk.jpg the difference in bj angle compared to stock... they are also 3/4" longer http://imageshack.us/a/img163/5489/jj63.jpg tacked together... ready to take out bushings and weld solid http://imageshack.us/a/img42/7854/etlc.jpg |
Re: new bagged 79 swb project
visited the nieghbor this morning, came up with a met graphite color for my arms...
http://imageshack.us/a/img812/1666/jj6k.jpg assembled and ready for install.. http://imageshack.us/a/img560/2694/1m2b.jpg arm angles frame flat on ground.. http://imageshack.us/a/img43/954/f2yi.jpg frame just touching ground... this is point where bags are compressed all the way, so i will be able to throw some shims in to fine tune the ride height. http://imageshack.us/a/img841/7372/9vkh.jpg next major step will be a body drop... not tradional, not exactly stock floor either... just have to check back ;) |
Re: new bagged 79 swb project
badass!!!!! I want some of them arms!!!!! lol!
|
Re: new bagged 79 swb project
Quote:
soooo im just gonna stock floor it, lay the pinch welds and be able to turn... problem solved.... i see lots of overhead welding plans for next weekend:waah: btw... these arms at RH managed -.25* camber, and +6* caster with no shims at all....almost like i planned it. |
Re: new bagged 79 swb project
Great build, waiting to see the dash.....
Tim Posted via Mobile Device |
Re: new bagged 79 swb project
Looks really good
|
All times are GMT -4. The time now is 07:15 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com