The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The pre 1947 Chevrolet & GMC Truck Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=202)

- - 46 gas pedal help (https://67-72chevytrucks.com/vboard/showthread.php?t=718404)

wutnxt

09-22-2016 08:47 PM

46 gas pedal help

2 Attachment(s)

We are building a 1946 chevy pick up and have a gas pedal question .....What are we missing....What connects the ball to the pedal ?....we have the link pin but can't find a picture of the missing part .....any help ?

Hewfil1

09-22-2016 09:08 PM

Re: 46 gas pedal help

1 Attachment(s)

You have the wrong end it would seem. Should be flat and have a bolt hole to go in. Should be one solid arm, not anything connected to a ball. (See attached pic)

wutnxt

09-22-2016 09:14 PM

Re: 46 gas pedal help

2 Attachment(s)

A couple of pictures showing the dual carbs it also has a set of fentons....led projection head lights .....dropped straight axle....4 wheel power disc brakes
thanks

wutnxt

09-22-2016 09:16 PM

Re: 46 gas pedal help

Quote:

Originally Posted by Hewfil1 (Post 7721461)

You have the wrong end it would seem. Should be flat and have a bolt hole to go in. Should be one solid arm, not anything connected to a ball. (See attached pic)

Wow....thats nothing like we had what we had when it came in.....Thanks for that

Hewfil1

09-22-2016 09:21 PM

Re: 46 gas pedal help

Quote:

Originally Posted by wutnxt (Post 7721472)

Wow....thats nothing like we had what we had when it came in.....Thanks for that

No problem. Found the info on a site where a guy was trying to solve cab noise while driving. Loose pin on his turned out to be the problem so, luckily there was a picture showing it.

wutnxt

09-22-2016 09:42 PM

Re: 46 gas pedal help

Quote:

Originally Posted by Hewfil1 (Post 7721482)

No problem. Found the info on a site where a guy was trying to solve cab noise while driving. Loose pin on his turned out to be the problem so, luckily there was a picture showing it.

Well we are having a problem with the springs on the carbs and stiff linkage bending the rod we made so was wondering what it had from the factory......But i searched all over and couldn't come with a picture or anything other then the pin and the pedal. Thanks again I knew someone here of the forum could help me out

All times are GMT -4. The time now is 12:48 AM.