76 SWB Truck Parts
1 Attachment(s)
PICKUP ONLY! Rebuilt front suspension including new upper a-frames,upper/lower ball joints,tie rods,pitman arm,idler arm and a-frame bushings. $400 for complete front suspension minus steering box. 12 bolt 3:42 non-posi rear $200. Decent swb step bed with little rust in rear of one fender (missing some crossmembers)$300. Cab is rough and no title. Please respond in post.
|
Re: 76 SWB Truck Parts
1 Attachment(s)
22222
|
Re: 76 SWB Truck Parts
1 Attachment(s)
333333
|
Re: 76 SWB Truck Parts
1 Attachment(s)
44444
|
Re: 76 SWB Truck Parts
1 Attachment(s)
55555
|
Re: 76 SWB Truck Parts
1 Attachment(s)
66666
|
Re: 76 SWB Truck Parts
1 Attachment(s)
77777
|
Re: 76 SWB Truck Parts
1 Attachment(s)
8888888
|
Re: 76 SWB Truck Parts
Sold bed local.
|
Re: 76 SWB Truck Parts
Bump
|
Re: 76 SWB Truck Parts
How much for the cab?
|
Re: 76 SWB Truck Parts
Rear molding has been sold. $150 for what’s left of cab.
|
Re: 76 SWB Truck Parts
Bump
|
Re: 76 SWB Truck Parts
One more time
|
Re: 76 SWB Truck Parts
Bump
|
Re: 76 SWB Truck Parts
Bumpity
|
Re: 76 SWB Truck Parts
Rear panels were sold with the bed?
|
Re: 76 SWB Truck Parts
I sold bed complete if that’s what you’re asking.
|
Re: 76 SWB Truck Parts
I see you’re selling the front suspension. Would you sell the front cross member? I know it’s have to be cut out of the frame.
|
Re: 76 SWB Truck Parts
Yes. It’s priced in original part of the add. It will unbolt or I can cut frame behind front wheels.
|
Re: 76 SWB Truck Parts
Are you just talking about crossmember not suspension? 90 suburban the same?
|
Re: 76 SWB Truck Parts
Sorry I need to be more clear. Just the cross member on the 76. I just want to make sure I wasn’t breaking up what you’re trying to sell.
|
Re: 76 SWB Truck Parts
I’ll check it out tomorrow.
|
Re: 76 SWB Truck Parts
How much for some 5 lug wheels ?
|
Re: 76 SWB Truck Parts
I’ll have to see what I have. Need to keep a few rollers around.
|
Re: 76 SWB Truck Parts
Drewbee $25. Flashed $25 each.
|
Re: 76 SWB Truck Parts
Hey thanks but I’m going to pass right now.
|
Re: 76 SWB Truck Parts
Tim , I found him a couple locally .
|
Re: 76 SWB Truck Parts
Bump
|
Re: 76 SWB Truck Parts
Again
|
Re: 76 SWB Truck Parts
Does the suspension include the spindles, calipers, and rotors? Is it all unbolted from the frame already? Thanks
|
Re: 76 SWB Truck Parts
Yes includes all that. It’s still bolted to the frame I would probably just cut the frame and let you carry the whole park forward because the frame is bent on one frame horn.
|
Re: 76 SWB Truck Parts
Front suspension and steering box sold.
|
Re: 76 SWB Truck Parts
1 Attachment(s)
Here’s what’s left before it goes to Scrap. Interest in what’s left?
|
Re: 76 SWB Truck Parts
1 Attachment(s)
22222
|
Re: 76 SWB Truck Parts
Are there seatbelts in the truck still?
|
Re: 76 SWB Truck Parts
1 Attachment(s)
Yes but they are rough. I have a dark gray set from a square body truck if you want pics of those.
|
Re: 76 SWB Truck Parts
Chromoholic here on the board is looking for mounting hardware for 76/77 seatbelts with mid mount retractors. Does this truck have them? There would be a floor mounted retractor, but also one that bolts to the door jamb area near the striker bolt.
|
Re: 76 SWB Truck Parts
I’ll check it out when I get a chance. Didn’t make it there today.
|
Re: 76 SWB Truck Parts
Thanks, please keep us posted
|
All times are GMT -4. The time now is 12:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com