Parting out 62 C30
 

I'll be parting this truck very soon unless somebody is interested in the complete truck. The truck was last driven on the road in 2011, has not been started in a couple years but should run with some tinkering. Tires, clutch, and exhaust were new in 2010. Now needs a rear brake line and some electrical work. Body is very rusty, doors are in bad shape. Lower fenders are shot , inner fenders rusted out, rust above windshield, bed wood is rotten. 283\4 speed. $1800 as it sits.

Located in Blacksburg, VA

Re: Parting out 62 C30
 

more pics.

Re: Parting out 62 C30
 

Dibbs on the grille if you part it. Does it have PS? Any dash pics?

Re: Parting out 62 C30
 

Got any better pictures of the engine and also the interior?

Re: Parting out 62 C30
 

Does not have PS.

No engine pics yet, here's a few interior pics:

Re: Parting out 62 C30
 

would u b willing to cut out a section of the floor? Need a patch panel around the hole the clutch linkage goes thru. I can post a pic if needed. Also interested in the rear view mirror if day/night.

Thanks

Re: Parting out 62 C30
 

I would be interested in the instrument cluster, radio delete, lighter delete and possibly some under hood parts pending pics if you part it out. Good luck with the sale.

Re: Parting out 62 C30
 

If the truck doesn't sell complete I'd cut up the floor. Does not have a day\night mirror.

Re: Parting out 62 C30
 

id be interested in the hood ordainment and the radio delete plate and windshield wiper retainer nut / knob

Re: Parting out 62 C30
 

I'll give the whole truck a week or so before I start parting, will keep the situation updated. Thanks!

Re: Parting out 62 C30
 

You're first in line on the grill, will let you know. Thanks.

Re: Parting out 62 C30
 

Looking for a stock air cleaner, if it's still there...

Re: Parting out 62 C30
 

Sorry, don't have the stock air cleaner.

Re: Parting out 62 C30
 

more pics:

Re: Parting out 62 C30
 

Interested in heater deletes and washer container as well.

Re: Parting out 62 C30
 

I'm interested in the bell housing.

Re: Parting out 62 C30
 

Alright, I'm parting the truck. 62 Barnfind has dibs on the bell housing and horseshoe mount. Everyone else who has posted here will be contacted regarding their requests.
I will be pulling parts this weekend.

I don't have PayPal so payment will be USPS money order, check or cash. All parts are plus shipping. Small stuff will ship typically by USPS, larger stuff by FedEx or Fastenal.

Re: Parting out 62 C30
 

I would guess that 62Barn is going to need that V8 throttle lever too....

Re: Parting out 62 C30
 

Yes I am, Thanks! Gargoyle I sent you a Pm.

Re: Parting out 62 C30
 

Six wheels and tires. Tires were new in 2009\2010 and have between 2000-3000 miles on them. Front are radials, rears are bias ply 16.5x75. Front rims and outer rear rims are the later style (drop center?), inner rears are the original style flat base. $300, local pickup is preferred.

Re: Parting out 62 C30
 

ScottH,
How big of a patch do you need?

Re: Parting out 62 C30
 

Are you still interested in the grill?

Re: Parting out 62 C30
 

Is that a hazzard flasher knob? if so I take it? 20$ plus the ride? Shipping 93291-8103

Re: Parting out 62 C30
 

2nd on the grill depending on price. is the engine original to the truck? how much for it complete?

Re: Parting out 62 C30
 

I need a good patch that goes from just above the clutch linkage hole to a little below the gas pedal studs. If u need width & length LMK. Also I have a lead on a patch already, so dont cut anything just yet. Wanted to c if u had it incase the other source doesnt work out.

Thanks
Scott