Re: How about some pics of High Performance haulers.
 

What ever the truck will hold. Somewere around 250-300 on the first and 125-175 on the second. We will just have to see.I am looking for some good numbers. if i don't get the numbers i am looking for i am going in with my 588 and lay it down.

Re: How about some pics of High Performance haulers.
 

it will get some track time one day
this is what i have now
just a 350 th 350 gov lock 12 bolt
http://i886.photobucket.com/albums/a...GAGESTRK11.jpg
http://i886.photobucket.com/albums/a...GAGESTRK10.jpg

Re: How about some pics of High Performance haulers.
 

How many horse and torque are you pumping out Bud?
http://public.bay.livefilestore.com/...ramerDance.gif

Re: How about some pics of High Performance haulers.
 

im guessin 275 - 300 because of the sh!tty heads i have

Re: How about some pics of High Performance haulers.
 

Yea.....
There's alot that I want to do to mine.
Right now the way it's built it's pumping out around 400hp.
Well it's not running at all now....
Collecting dust.
http://public.bay.livefilestore.com/...lowJacketI.jpg
http://public.bay.livefilestore.com/...830080931a.jpg
http://soundboard.com/sb/1Bad62ProStreet.aspx

Re: How about some pics of High Performance haulers.
 

whats done to it

Re: How about some pics of High Performance haulers.
 

E N G I N E:

Year and Make:
1969 Chevrolet
Displacement:
350ci LS9 Cast Iron 4 Bolt Main (.30 over)
400hp@5000RPM
380Ft. Lbs@3800RPM
9.5:1 Compression Ratio
Pistons:
Hyperedic Cast Aluminum Flat Top
Camshaft Hydraulic Dual Pattern (Lift .443” Int., .465” Exh.)
Crankshaft:
Nodular Cast iron
Heads:
Chevrolet 291 Double Hump (camel hump)
1.94 Int 1.50 Exh
Valve Covers:
TBD
Manifold / Induction:
Eldebrock Performer ESP
600-cfm Eldebrock Carb.
Ignition / Wires:
Petronics Flame Thrower HEI
8mm Delco yellow plug wires
Headers:
Hooker 1970 Corvette Style
Exhaust / Mufflers:
3inch / 2 Chamber Flowmaster 40 Series
with 22”x 5” Baloneys ChromeTips
at this time.
Changing exhaust to maybe magnaflows with H or X Pipe.

A little dirty....Ha ha
http://public.bay.livefilestore.com/...lowJacketI.jpg
http://public.bay.livefilestore.com/...830080931b.jpg

Re: How about some pics of High Performance haulers.
 

Wow the engine I have on the engine stand is being built right now and it is almost piece by piece the same as the one in your truck except for 461 camel humps. Mine has been taken .40 over though it is good to know this set up may get close to 400hp I was shooting for 350hp! Is there anything you now wish you had done to it while it was out?

Re: How about some pics of High Performance haulers.
 

Hey guys Im making a pulling truck with a 327 (old school blue block) Got any performace upgrades ideas? I already have edelbrock intake manifold 4 barrel carb and aircleaner Plus some headers

Re: How about some pics of High Performance haulers.
 

cam heads pistons
need the compression ratio to match the cam
what intake

Re: How about some pics of High Performance haulers.
 

Im not sure what it is I just know it edelbrock. Im just starting to get into all of this stuff(Im only 16) so bear with me.

I have some 283 heads I was gonna get port and polished.. Think that would help?

Re: How about some pics of High Performance haulers.
 

im 15 :D
dont use the 283 heads they have tiny valves
i have ported and polished 283 power pack heads now and they are robbing power
get some decent heads small combustion chambers not too small or you cant run pump gas and big vlaves 1.94 or bigger
what headers (down tube size and collector size)
what cam do you have?
what pistons do you have?
have you been into the engine?

Re: How about some pics of High Performance haulers.
 

Lol nice.

Uh I have just bought it from my dads freind like 3 days ago so I havent been it. I has a 327 as I said. (old blue block) Everything is stock minus the intake manifold, carb, air cleaners, headers, and I just bought some valve covers. lol

I got my own thread if you wanna look at it.

Like I said if you wanna ask me something I dont know to much about trucks yet.. so yeah.

Re: How about some pics of High Performance haulers.
 

do you have a link

Re: How about some pics of High Performance haulers.
 

Re: How about some pics of High Performance haulers.
 

If you are talking about double hump heads they flow pretty decent if you get some that are 2.02 valve. But don't waste your money on getting them port and polished and rebuilt if they are just wore out. For the price of getting them ported you could buy a better flowing aftermarket head . The Sportsmen brand stock replacement head they sell is even better than a set of cleaned up double humps. Or mabey invest in some even better vortec heads.

Re: How about some pics of High Performance haulers.
 

Here's a couple of pretty cool ones :sexy:

Re: How about some pics of High Performance haulers.
 

Where do you get them and How much cash is it gonna take?

Re: How about some pics of High Performance haulers.
 

Specs and 1/4 mile are in my sig. ET is slow, because turbo is so big, it takes awhile for it to fully light, but it MPHs like a mofo.

http://hphotos-snc3.fbcdn.net/hs077....7_457902_n.jpg

Re: How about some pics of High Performance haulers.
 

How big is the turbo?

Re: How about some pics of High Performance haulers.
 

Yea, i am curious too. Truck is sweet looking. Cant wait to see what it does without a blown head gasket per your sig.

Re: How about some pics of High Performance haulers.
 

MY 86 STREET/STRIP SHORT BED :chevy::metal::metal:

Re: How about some pics of High Performance haulers.
 

hey 1 bad 62 is that a mustang II frontend

Re: How about some pics of High Performance haulers.
 

My favorite pics of my pile http://i358.photobucket.com/albums/o...DSC_0143-2.jpg http://i358.photobucket.com/albums/o...t/t-n-t3-1.jpg

Re: How about some pics of High Performance haulers.