The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   WIW (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=83)
-   -   1970 K10 SB Stepside (https://67-72chevytrucks.com/vboard/showthread.php?t=772403)

Travisarmenta 10-01-2018 11:01 AM

1970 K10 SB Stepside
 
Strait 6, Runs, Drives, Stops.

It does have rust, Its a Virginia truck.

Working out a trade right now.

I know its a Factory K10 SB Stepside.

I know pics will help with estimate, but just from info you have, what do you guys think?

Working out a trade for it

richard2717 10-02-2018 07:04 AM

Re: 1970 K10 SB Stepside
 
without more detail it is hard to say but if good title and running driving condition should be $1500 and up imo

Travisarmenta 10-02-2018 11:24 AM

Re: 1970 K10 SB Stepside pic added
 
1 Attachment(s)
added pics

Mudder 10-05-2018 05:26 PM

Re: 1970 K10 SB Stepside
 
I give 1500 for it.

Harlowhead1972 10-08-2018 11:29 AM

Re: 1970 K10 SB Stepside
 
$2500-3000. The lack of bed definitely hurts the value. True short bed 4x4's are getting hard to find in any condition. Harlow

Travisarmenta 10-09-2018 09:28 AM

Re: 1970 K10 SB Stepside
 
Quote:

Originally Posted by Harlowhead1972 (Post 8359567)
$2500-3000. The lack of bed definitely hurts the value. True short bed 4x4's are getting hard to find in any condition. Harlow

That was my thought as well, the Strait 6 and no bed def makes it less desirable and (I actually like the bed) If i pick it up, I will most likely replace the 6.

Harlowhead1972 10-09-2018 09:58 AM

Re: 1970 K10 SB Stepside
 
Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Travisarmenta 10-09-2018 10:49 AM

Re: 1970 K10 SB Stepside
 
Quote:

Originally Posted by Harlowhead1972 (Post 8360272)
Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

I will let you know when I find out. The SPID does not have any info on the gearing though, it does however have the 292 CI RPO.

Travisarmenta 10-09-2018 01:17 PM

Re: 1970 K10 SB Stepside
 
Quote:

Originally Posted by Harlowhead1972 (Post 8360272)
Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Just did a little more digging, it's actually a Fleetside truck. Looks like the 205 was standard in 1970 according to GM heritage center.

And the K series came standard with 3:73 as well.

No RPOs for either gearing, nor transfer case.

It is a Z62 truck with both upper and lower moldings, so if I grab it and keep it, I might bring her back to her glory, a little at a time.

Travisarmenta 10-10-2018 12:06 PM

Re: 1970 K10 SB Stepside
 
Quote:

Originally Posted by Harlowhead1972 (Post 8360272)
Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Received confirmation via pic, it is a 205. might make the deal happen by end of the week.

Travisarmenta 10-15-2018 10:12 AM

Re: 1970 K10 SB Stepside
 
It's home, pics to follow in truck thread.

Harlowhead1972 10-19-2018 09:22 AM

Re: 1970 K10 SB Stepside
 
Congrats!


All times are GMT -4. The time now is 07:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com