The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Full time 4x4 front hub parts (http://67-72chevytrucks.com/vboard/showthread.php?t=799530)

Fishermen0105 01-13-2020 03:56 PM

Full time 4x4 front hub parts
 
Anybody have full time 4x4 front hub parts they could part with for a np203? Have the springs and one gear but missing the metal rings the springs sits in and a couple snap rings I think. Thanks matt

kwmech 01-14-2020 01:19 AM

Re: Full time 4x4 front hub parts
 
I may actually have some of that sitting around under my work bench

Fishermen0105 01-14-2020 01:11 PM

Re: Full time 4x4 front hub parts
 
Let me know...

kwmech 01-14-2020 10:09 PM

Re: Full time 4x4 front hub parts
 
OK what I saw were bolt on drive slugs for a 3/4 ton...sorry

hatzie 01-15-2020 04:38 PM

Re: Full time 4x4 front hub parts
 
Quote:

Originally Posted by kwmech (Post 8659975)
OK what I saw were bolt on drive slugs for a 3/4 ton...sorry

The Dana 44 on the 1/2 & 3/4 tons got slugs or hub locks depending on what transfer case was installed.

kwmech 01-17-2020 11:58 AM

Re: Full time 4x4 front hub parts
 
Quote:

Originally Posted by hatzie (Post 8660357)
The Dana 44 on the 1/2 & 3/4 tons got slugs or hub locks depending on what transfer case was installed.

Ummm, yes I know that. 3/4 ton --203 trucks had bolt on drive flanges if you want to get technical. Just like the 3/4 tons with the 205 had bolt on locking hubs. These replaced the locking hubs with the 203 case

hatzie 01-18-2020 01:25 PM

Re: Full time 4x4 front hub parts
 
Quote:

Originally Posted by kwmech (Post 8661173)
Ummm, yes I know that. 3/4 ton --203 trucks had bolt on drive flanges if you want to get technical. Just like the 3/4 tons with the 205 had bolt on locking hubs. These replaced the locking hubs with the 203 case

The point I was trying to make was the slug he found should get you a little closer to the parts you need for full time 4x4.

The other option is to install WARN hub locks and fix the locks in the engaged position with a set screw.

Fishermen0105 01-18-2020 01:42 PM

Re: Full time 4x4 front hub parts
 
Found some. Thanks

hatzie 01-18-2020 02:20 PM

Re: Full time 4x4 front hub parts
 
Quote:

Originally Posted by Fishermen0105 (Post 8661737)
Found some. Thanks

Excellent :two::metal::metal:


All times are GMT -4. The time now is 10:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com