53 Chevy SBC to Stock tranny
Would the stock bellhousing bolt up ?
Have a customer who is on the fence with this build... Keep the stock sixer, or go V8 |
Re: 53 Chevy SBC to Stock tranny
You would need a later V-8 bellhousing and then would have to replace the crossmember with one from a 54 Chevy pickup.
|
Re: 53 Chevy SBC to Stock tranny
Thank you. ...
|
Re: 53 Chevy SBC to Stock tranny
That is cast iron V8 truck bellhousing 55 to early 60's.
The stock crossmember can be used but you have to modify it a bit so the motor mounts on the V8 bellhousing will sit down on it right. With the 54 crossmember you just bolt it on. My 48 had a rather hack job modification done to it when I bought it with the 194 and V8 bellhousing in it. |
Re: 53 Chevy SBC to Stock tranny
Thanks guys
|
All times are GMT -4. The time now is 04:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com