The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   What is this part? (https://67-72chevytrucks.com/vboard/showthread.php?t=832517)

Dan_P 03-25-2022 03:06 AM

What is this part?
 
1 Attachment(s)
I'm getting ready to do a bunch of rust repair.

Does anyone know what part this is? I can't find it on ClassicHeartbeat, GMC Pauls, LMC, Brothers, etc.

I can't find a schematic that matches. It has rust on both passenger and driver side, so my preference is to replace the whole thing.

The picture is from the driver side, rear wheel well, looking forward. Picture is taken from the front of the rear driver tire looking forward. You can see the back of the driver rocker box (with end cap removed).
You can see the rocker box mounts to it (rusted out on left side), and it also attaches to the polyurethane body mount. Runs east to west.

Warrens69GMC 03-25-2022 03:17 AM

Re: What is this part?
 
With the picture you provided, I can't place it. Sorry

Dan_P 03-25-2022 03:28 AM

2 Attachment(s)
Quote:

Originally Posted by Warrens69GMC (Post 9056500)
With the picture you provided, I can't place it. Sorry

I will try to get a better picture tomorrow. Tough to get something given the location.
Posted via Mobile Device

Thealien 03-25-2022 06:04 AM

Re: What is this part?
 
Sorry I thought you meant the part below. Disregard.

richard2717 03-25-2022 07:54 AM

Re: What is this part?
 
It is a cross sill that I think is Blazer specific. I don't know if it is available repop by itself. I know the rear most one is available, will see if I can find a link


Edit: here is a link to what might be it. I would call them and verify that it is the correct position. The picture they have leaves much t o be desired

https://www.classicparts.com/1969-72...info/13-025B/#


.

hemi43 03-25-2022 08:22 AM

Re: What is this part?
 
2 Attachment(s)
It's a cross sill like Richard said. Not sure if they are reproduced now, but when I did my Blazer I used a pickup truck cross sill. I seem to recall the only modification I had to do was at the area where the hold-down bolts go through. You can see in the picture there's flat indentations where the bolts go that I had to put in. The pickup truck part is flat in this area.

EDIT; I checked Bill's trucks (near me) and that part is now available for the Blazer. Check out page 153 in the link below part # 27-5117-A
https://billstruckshop.com/wp-conten...2-2022-Jan.pdf

lks dcvn 03-25-2022 11:56 AM

Re: What is this part?
 
1 Attachment(s)
Check out Key Parts to get the part number then Jegs.com for cheap/free shipping.

Dan_P 03-25-2022 12:38 PM

Re: What is this part?
 
1 Attachment(s)
Thanks everyone. I think this is it - was able to use KeyParts + the pics above to find the part and order from Jeggs. (Jeggs doesn't have the image - so key parts link was key).

Dan_P 03-25-2022 12:45 PM

Re: What is this part?
 
I wish mine looked like this!


All times are GMT -4. The time now is 06:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com