school me on traction bars
Got an 87 R10 with a flip kit in the rear. What traction bars will fit? Looking at the Lakewood 21715's but they look like they are for the stock setup with the axle under the leafs.
Do I need bars from something like a Camaro that already has the axle above the leafs? Or does somebody make a set for this common setup? Thanks |
Re: school me on traction bars
|
Re: school me on traction bars
|
Re: school me on traction bars
I cut up a cheaper set of universal slapper bars and welded them to the lower shock mounts on one of my trucks . They work great.
|
Re: school me on traction bars
Will caltracs work?
|
Re: school me on traction bars
Quote:
|
Re: school me on traction bars
Quote:
|
Re: school me on traction bars
Quote:
|
Re: school me on traction bars
Quote:
|
Re: school me on traction bars
What kind of power are you making ? caltracs tend to stiffen the street ride and they do make some noise.
|
Re: school me on traction bars
We put them in a friends ride and that thing can hook in a car wash.
|
Re: school me on traction bars
Quote:
Got a M-20 4 speed behind it. Rear is a stock 10 bolt with 3.08 gears (for now). It gets a bad case of wheel hop when I accelerate hard. |
Re: school me on traction bars
A homemade set of slappers will stop your wheel hop issue and the factory shock should be stiff enough on extension for now . Caltracs would be optimal , but home built slappers will work . If it hops don't keep going hop = nbroken parts.
|
All times are GMT -4. The time now is 12:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com