67-72 Bench seat lowering brackets ??
 

Hello. Before I chop and fab my original bench seat brackets does anyone make lowering brackets for a 67-72 factory bench. I need more head-room.

Thx Steve

Re: 67-72 Bench seat lowering brackets ??
 

Yes they do. Full Custom Fabrication makes them. I know a few guys on the forum have used these already. The ones shown in the link are their original design. The new brackets are solid and have FCF laser cut into them.

Re: 67-72 Bench seat lowering brackets ??
 

Do you gain more room between the steering wheel and the driver when you lower the seat?

Re: 67-72 Bench seat lowering brackets ??
 

Yes it does. I am 6’3” and definitely worth the money.

Re: 67-72 Bench seat lowering brackets ??
 

I got them installed yesterday. Makes a huge difference.

Re: 67-72 Bench seat lowering brackets ??
 

I have the FCF brackets. I love the way it sits, now! I'm 6'4", and the driving position is so much better!!

https://i.hmjimg.com/images/2018/05/..._150152.md.jpg
https://i.hmjimg.com/images/2018/05/..._122201.md.jpg
https://i.hmjimg.com/images/2018/05/..._122215.md.jpg

Re: 67-72 Bench seat lowering brackets ??
 

A good piece of advice, install the bolts from underneath to create a "stud" so the brackets just slips over it, then install a washer and nut. Much easier than trying to wiggle a bolt in place through the floor.

Re: 67-72 Bench seat lowering brackets ??
 

Those that have installed these... my issue is legroom... do you gain or lose any? I have almost no headroom after installing new seat foam. I really like how comfy the seat is now, but on a good enough bump, I've bumped my head on the cab roof. If I can lower the seat and not loose leg room that sounds like a fantastic plan to me.

Re: 67-72 Bench seat lowering brackets ??
 

Awesome, now I can install my headliner without my head being in the way.

Re: 67-72 Bench seat lowering brackets ??
 

Thanks for the pic's and info 68Stepbed. I see a set in my future..

Steve

Re: 67-72 Bench seat lowering brackets ??
 

Does anyone know if these brackets will work on the popular 88-90 seats??

Re: 67-72 Bench seat lowering brackets ??
 

Jesse, I'm 6'4" 295lbs. My seat was always comfortable, but sat too high. These brackets don't really increase leg room, but put your torso in a better position so your legs will bend in a more comfortable and controlled way. If there's a downside, as the seat lowers, it also moves forward slightly, so puts you closer to the wheel, but it's not uncomfortable or awkward. If we can ever meet up, you're more than welcome to sit in the truck and maybe even take it for a short drive to see how mine feels before ordering a set.

Re: 67-72 Bench seat lowering brackets ??
 

Oh lawdy, don't tempt me, I'd make a weekend trip out of it! :burnout:

Are you doing any of the Power Tour next month? It's in our neck of the woods almost the whole drive.

Re: 67-72 Bench seat lowering brackets ??
 

Come on down!!

No plans for Power Tour. It conflicts with my wife's vacation time.

Re: 67-72 Bench seat lowering brackets ??
 

Received my new brackets and getting ready to reinstall my seat one evening.

Re: 67-72 Bench seat lowering brackets ??
 

So just how much lower are these brackets vers stock? approx?

Re: 67-72 Bench seat lowering brackets ??
 

2 inches

Re: 67-72 Bench seat lowering brackets ??
 

Do you have an after shot of the height? Are you happy with them? I installed PUI foams and now sit way too high. Either going to buy these or cut down my seat brackets. Other option is to cut my foams but that would be a pain since the seat is done.

Re: 67-72 Bench seat lowering brackets ??
 

Very much so. I will post pics tonight of the difference

Re: 67-72 Bench seat lowering brackets ??
 

I’m interested in this also.

Re: 67-72 Bench seat lowering brackets ??
 

I bought a set as well. Not installed yet, but they appear to be very nicely made with a good quality finish on them.

Almost a shame you won't be able to see them.

Re: 67-72 Bench seat lowering brackets ??
 

I will post these pics on both threads to hopefully help. In one pic, (the best I have) you can see the top of my seat right to the real window rubber - and with brackets installed, the amount the seat has dropped overall. I'm afraid I forgot this morning to measure clearance under the seat for sub-woofer installation, but still can.

Re: 67-72 Bench seat lowering brackets ??
 

Thanks for showing that photo. That looks like a big difference! I am guessing I may still need to cut my foams. If you notice in my picture, the back foam curve does not meet the seam on the seat cover. I noticed this when I was assembling the seat but must have been in denial figuring it would be OK. But when I sit in the seat I feel like I am being pushed forward as well as pushed up.
BTW nice truck!

Re: 67-72 Bench seat lowering brackets ??
 

Yes, I see. I want to look as well at the mounting. The bracket bases have a slotted hole, and I feel like the seat had to be in the forward end of the slot, pushing it just slightly more forward, but I will check.

Re: 67-72 Bench seat lowering brackets ??
 

I'm tempted to go buy some C-channel or square tubing and weld a cross piece as a trial to see the height as well as seeing if I feel like I'm sitting on the floor.