The 1947 - Present Chevrolet & GMC Truck Message Board Network - Need help identifying serpentine setup.

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Need help identifying serpentine setup. (https://67-72chevytrucks.com/vboard/showthread.php?t=792793)

portworks

09-01-2019 07:41 PM

Need help identifying serpentine setup.

4 Attachment(s)

Not the original engine, looking for correct bracket to add air conditioning compressor.

Warrens69GMC

09-01-2019 08:14 PM

Re: Need help identifying serpentine setup.

Bracket is already there, you have a bypass pulley to the left of the tensioner

1988-`1995 brackets

Pontiac1976

09-02-2019 11:41 AM

Re: Need help identifying serpentine setup.

That correct started in 1988

95 S_Trucker

09-02-2019 02:14 PM

Re: Need help identifying serpentine setup.

Those are 88-89 brackets. 88-89 were made out of stamped steel. 90-95 are cast aluminum.

Warrens69GMC

09-02-2019 02:53 PM

Re: Need help identifying serpentine setup.

Quote:

Originally Posted by 95 S_Trucker (Post 8586378)

Those are 88-98 brackets. 88-89 were made out of stamped steel. 90-95 are cast aluminum.

1996-1999 put the compressor on the driver side top, part number 12554522

95 S_Trucker

09-02-2019 04:20 PM

Re: Need help identifying serpentine setup.

Quote:

Originally Posted by Warrens69GMC (Post 8586396)

1996-1999 put the compressor on the driver side top, part number 12554522

I had a typo. It’s fixed. It should have said 88-89.

portworks

09-11-2019 07:21 PM

Re: Need help identifying serpentine setup.

Thanks for all the replies. With the compressor moved to the passenger side, what condenser and manifold hose set should I use?

SCOTI

09-12-2019 05:53 PM

Re: Need help identifying serpentine setup.

Quote:

Originally Posted by portworks (Post 8591913)

Thanks for all the replies. With the compressor moved to the passenger side, what condenser and manifold hose set should I use?

88-91 sbc Burb should work fine.

portworks

09-19-2019 08:20 PM

Re: Need help identifying serpentine setup.

Thanks everyone.

All times are GMT -4. The time now is 03:03 PM.