The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Finally Got our 1970 2wd Blazer Home (https://67-72chevytrucks.com/vboard/showthread.php?t=790233)

wesmigletz 07-14-2019 04:36 PM

Finally Got our 1970 2wd Blazer Home
 
My wife and I had been searching for a Blazer, Bronco or Scout to replace her 70 CST we sold to buy a rental property a while back. I came across this on ebay, just after it had been listed late on a Sunday night. The price was reasonable, and didn't think we'd easily find another factory 2WD K5, so I hit the buy it now. When I spoke with the seller the next morning, he said that he had a couple guys offering him a couple grand more than I paid.


It ain't pretty, but it's ours and it's home.


Getting it off the trailer and towing it to our house (the delivery truck couldn't fit down our street)
http://pic100.picturetrail.com/VOL43.../414258152.jpg

http://pic100.picturetrail.com/VOL43.../414258153.jpg

Looks like it has the utility buckets rather an sport buckets - will sport buckets bolt to the utility bucket brackets?
http://pic100.picturetrail.com/VOL43.../414258151.jpg

1rippen6 07-14-2019 08:06 PM

Re: Finally Got our 1970 2wd Blazer Home
 
Congrats on the buy!! Unfortunately the utility brackets won't work on sport buckets. The sport bucket brackets won't bolt to the floor either unless you are lucky. I've had a couple that had previsions for both but most don't.

wesmigletz 07-14-2019 09:46 PM

Re: Finally Got our 1970 2wd Blazer Home
 
Quote:

Originally Posted by 1rippen6 (Post 8558621)
Congrats on the buy!! Unfortunately the utility brackets won't work on sport buckets. The sport bucket brackets won't bolt to the floor either unless you are lucky. I've had a couple that had previsions for both but most don't.

Thank you for the information. I'll have to check for the other provisions when I get home. Hopefully they'll be there.

CG 07-15-2019 10:14 AM

Re: Finally Got our 1970 2wd Blazer Home
 
Can you tell me about the shipping process please. How did you go about it, how far, and if you don't mind the cost. Im looking at having something shipped and its all high or higher haha!

Thanks, and congrats on the Blazer.

wesmigletz 07-15-2019 12:12 PM

Re: Finally Got our 1970 2wd Blazer Home
 
Well it was a convoluted process, but the seller helped arrange the shipping. I worked with the broker (I guess that's what he was called), and gave him very specific details about my house and location - small street off of a small street. The driver showed up with a big rig and a large car hauler and had to park about 1/2 a mile from my house to deliver a non-running car... none of the info I gave the broker made it to the actual driver. It was a bit of a Charlie Foxtrot to get the Blazer from the shipper to my house because it wouldn't start. I work in CA and wasn't there to assist. Fortunately my roommate was able to pull the Blazer with his Previa for my wife. I was expecting it to be delivered to my house, but that wasn't the case.

It shipped from the SLC Utah area to the North Dallas area for $849, plus I paid an extra $100 for the weight of all the parts that were packed in the Blazer. I think the price was good, it was +/-1300 miles. I wasn't happy about the driver expecting to deliver a non-running car to a residence in the Dallas metroplex with a big rig set-up. We live outside the city off a back road. I don't think the broker relayed any info I gave him, and I don't think the driver understood what I was telling him when we spoke. The driver never bothered to do a google Earth, or if he did, he intended to dump the Blazer wherever for me to deal with, I do not know.

Looking back, I should have been more proactive making sure the driver had the info he needed and that he understood me. The little I spoke to the driver I had trouble communicating due to a language barrier. All things considered, it was an OK experience, and I would probably use them again for a project car due to price; I would hesitate to use them for something nice.

On a different note, when my employer relocated me from CA to TX, my employer shipped my 57 and 62 Corvettes to TX, and I had to pay extra beyond what my employer covered for what was supposed to be enclosed, high end car shipping. The shipper, who was rather arrogant and expensive, but he did have a very well rehearsed "you get what you pay for speech" dropped a car on top of my 62 and banged up my 57 pretty good. I ended settling with my insurance company. At the end of the day, Bubba the broker and our driver did a better job than the high-end, professional shipper with the well-rehearsed speech...

The Blazer was delivered in tact and the price was pretty reasonable to me. If you want the broker contact, I will PM it to you.

This was on the nearest big street to our house. Once unloaded, they had to turn around and pull from the front.

http://pic100.picturetrail.com/VOL43.../414258152.jpg

1rippen6 07-24-2019 06:12 PM

Re: Finally Got our 1970 2wd Blazer Home
 
1 Attachment(s)
Here is a drivers side floor board with both sets of holes. This blazer has sport buckets the utility bucket holes have 5/16 phillips head bolts in them.

wesmigletz 07-24-2019 11:24 PM

Re: Finally Got our 1970 2wd Blazer Home
 
Quote:

Originally Posted by 1rippen6 (Post 8564281)
Here is a drivers side floor board with both sets of holes. This blazer has sport buckets the utility bucket holes have 5/16 phillips head bolts in them.

Rippen, thank you for the pic. I will be back in TX this weekend and see what my truck has on the floorboard. Hopefully it has both sets of bolt holes.

Wes

Concordca 07-28-2019 08:17 PM

Re: Finally Got our 1970 2wd Blazer Home
 
Check out Uship.com I have used them a few times. I bought a 71 Jimmy 2wd from Texas and had it shipped to California for $650 last year. Another truck I sold the buyer paid about $500 for an enclosed trailer to Los Vegas. The bids always start out high, but work their way down as more people/companies bid.


Quote:

Originally Posted by CG (Post 8558897)
Can you tell me about the shipping process please. How did you go about it, how far, and if you don't mind the cost. Im looking at having something shipped and its all high or higher haha!

Thanks, and congrats on the Blazer.



All times are GMT -4. The time now is 09:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com