Just picked up this 1990 Chevy
3 Attachment(s)
I started looking for one of these trucks a couple months ago and found this one. I ended up getting it for $1200 with a rod knocking.
|
Re: Just picked up this 1990 Chevy
2 Attachment(s)
Right now my plan is to pull the motor and replace it with a crate motor and have the transmission rebuilt.
|
Re: Just picked up this 1990 Chevy
Nice truck! Looks like solid bones to begin a project
|
Re: Just picked up this 1990 Chevy
2 Attachment(s)
Seems to me you created extra work for yourself by removing the radiator support. There's plenty of room to work otherwise. I swapped my engine out five years ago. I had the truck up on jackstands and Rhino ramps and I did the work myself. It looks like you have a solid truck to start your project. Good luck!
|
Re: Just picked up this 1990 Chevy
1 Attachment(s)
i just installed this, i wish i would have pulled my core support.
i didnt need to be, but it would have been an easier access. |
Re: Just picked up this 1990 Chevy
Quote:
|
Re: Just picked up this 1990 Chevy
Thats a fun looking truck, should be a sweet ride when done.
What create engine are you going with? |
Re: Just picked up this 1990 Chevy
1 Attachment(s)
Quote:
|
Re: Just picked up this 1990 Chevy
That engine looks like it has Vortec heads. The pic of your engine looks like TBI. I see a problem, but I hope not. Take a good look at your intake manifold unless you have another plan we're not in on.
|
Re: Just picked up this 1990 Chevy
Quote:
|
Re: Just picked up this 1990 Chevy
Quote:
|
Re: Just picked up this 1990 Chevy
Quote:
|
Re: Just picked up this 1990 Chevy
Here is the engine in the image:
https://www.summitracing.com/parts/vre-350g8795 Claims to be a direct replacement for many 87-95 vehicles. They switched to Vortec in 96, right? I assumed that is why this engine is listed as 87-95? |
Re: Just picked up this 1990 Chevy
Quote:
|
Re: Just picked up this 1990 Chevy
For sure get Summit on the horn.
Secondly you could try this http://www.summitracing.com/parts/nal-12496821 Also check out http://www.tbichips.comfor tips. Vortec will make for a great engine. |
Re: Just picked up this 1990 Chevy
i would call and confirm, i went with vortec as i knew i was swapping injection units...but my heads also have casting shapes on the ends of each heads...the pic is smooth, wich i thought were non vortec center bolts.
|
Re: Just picked up this 1990 Chevy
Quote:
|
Re: Just picked up this 1990 Chevy
You can use the 12496821 GMPP Vortec TBI intake but that's almost five Benjamins.
|
Re: Just picked up this 1990 Chevy
prior to finding ( or even looking for a forum like this), i sold the edelbrock tbi intake with tbi and all for $150 bucks....didnt think anyone would want it, and when a guy called and offered i jumped :dohh:
|
Re: Just picked up this 1990 Chevy
Why all this talk about Vortec heads vs TBI intake, etc? Why be so focused on a picture that could be generic when all the text from Summit states it is for TBI or carb and lists application for the years leading 'up to' 1996 when the Vortecs became standard? Do some people only look at pictures? Looks like he picked the right motor to me.
|
Re: Just picked up this 1990 Chevy
1 Attachment(s)
Motor runs like a champ. All put back together and fired up first time.
|
Re: Just picked up this 1990 Chevy
Congrats. She looks good in there.
|
Re: Just picked up this 1990 Chevy
Nice, should be a good long time runner.
|
Re: Just picked up this 1990 Chevy
Thanks guys. I think it will last a while as well.
|
Re: Just picked up this 1990 Chevy
Congrats! Enjoy driving your new truck.
|
All times are GMT -4. The time now is 03:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com