The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Pre 1947 Chevrolet & GMC Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=208)
-   -   NC 1936 pickup engine, trans, driveshaft and rear end, wire wheels (https://67-72chevytrucks.com/vboard/showthread.php?t=587213)

jcramsey 07-03-2013 10:45 AM

1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Posting this for my brother. Located in Marion, NC.

He's got an almost complete drivetrain for a 36 chevy truck he bought. 216 Engine, manual transmission, driveshaft and rear axle. Engine is complete minus intake, carb and exhaust. Trans looks to be redone and has a new clutch.

He has extra engine block and head that you can have as well.

$300 for engine and trans.

$150 for rear axle

$40 for driveshaft

$200 for set of (5) 17" 6 lug wire wheels

I can PM you his contact information.

zicc1835 12-10-2013 09:28 PM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Quote:

Originally Posted by jcramsey (Post 6154832)
Posting this for my brother. Located in Marion, NC.

He's got an almost complete drivetrain for a 36 chevy truck he bought. 216 Engine, manual transmission, driveshaft and rear axle. Engine is complete minus intake, carb and exhaust. Trans looks to be redone and has a new clutch.

He has extra engine block and head that you can have as well.

$300 for engine and trans.

$150 for rear axle

$40 for driveshaft

$200 for set of (5) 17" 6 lug wire wheels

I can PM you his contact information.

looking for a right rear fender 36

jcramsey 12-11-2013 10:58 AM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Quote:

Originally Posted by zicc1835 (Post 6412094)
looking for a right rear fender 36


Sorry, no fenders. My brother and I did talk to a guy at the Charlotte Auto Fair from up in Ohio that was making fenders for these trucks from the factory tooling. Pretty spendy, but killer parts. I'll see if I can find him online...

zicc1835 12-11-2013 05:17 PM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Quote:

Originally Posted by jcramsey (Post 6412841)
Sorry, no fenders. My brother and I did talk to a guy at the Charlotte Auto Fair from up in Ohio that was making fenders for these trucks from the factory tooling. Pretty spendy, but killer parts. I'll see if I can find him online...

thanks a bunch for the reply and i would consider a tooled fender purchase if you happen to find the info
Jess

jcramsey 12-11-2013 05:43 PM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Quote:

Originally Posted by zicc1835 (Post 6413422)
thanks a bunch for the reply and i would consider a tooled fender purchase if you happen to find the info
Jess

Jess
Pretty sure this is him...might be worth a call!

http://www.bowtiereproductions.com/index.html

Hope that helps!

Jeremy

zicc1835 12-11-2013 10:36 PM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
thanks very much
Merry Xmas

Quote:

Originally Posted by jcramsey (Post 6413461)
Jess
Pretty sure this is him...might be worth a call!

http://www.bowtiereproductions.com/index.html

Hope that helps!

Jeremy


jcramsey 04-11-2014 10:00 AM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
My brother still has the 216 motor for $150.

He also has a set of 36 low cab truck doors with interior panels, window regulators and latches for $600

zicc1835 04-11-2014 09:03 PM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Quote:

Originally Posted by jcramsey (Post 6623793)
My brother still has the 216 motor for $150.

He also has a set of 36 low cab truck doors with interior panels, window regulators and latches for $600

can i get some good pictures of the doors in out bottoms email is jziccarello@gmail.com
thanks
Jess

jcramsey 04-12-2014 11:33 AM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Hey Jess. I will give my brother your email and he will get you some pictures soon.

Thanks
Jeremy

michael bustamante 04-26-2014 01:41 PM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Got a pic of the wire wheels

jcramsey 04-26-2014 05:26 PM

Re: 1936 pickup engine, trans, driveshaft and rear end, wire wheels
 
Quote:

Originally Posted by michael bustamante (Post 6646966)
Got a pic of the wire wheels

Sorry...I need to update. Wheels are sold


All times are GMT -4. The time now is 05:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com