LS Swap engine mounts
 

Looking for feedback on LS Swap engine mounts that you guys have used. Would like one of the adjustable ones to give me some options for engine postion. Any brands to stay away from?

Re: LS Swap engine mounts
 

I used Dirty Dingo. They were the first sliders that I am aware of.

Re: LS Swap engine mounts
 

I have seen several people use these, they have 4 positions:
https://www.speed-engineering.com/ls...3-ls6-ls9.html

Re: LS Swap engine mounts
 

Check out the LS swap section and you can get lots info on the mounts and all the other swap questions.
Jimmy

Re: LS Swap engine mounts
 

if a guy is willing to build the stand side of your mounts, These will work with the stock truck style a/c bracket. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Re: LS Swap engine mounts
 

Look in the LS a lot of info in there.

Re: LS Swap engine mounts
 

I used these - "Billet Engine Swap Bracket SBC LS Conversion Motor Mount Adjustable Plate LS1 LS3 Adapter Motor 551628". Picked them up from Amazon. Inexpensive, adjustable, and both look and work great.

Re: LS Swap engine mounts
 

Doug_p, I also bought these but I haven't used them yet...did you used to orginal mounts and pedestals? What hole worked best for you? Thanks and sorry for all the questions.

Re: LS Swap engine mounts
 

Those worked well for me.

Re: LS Swap engine mounts
 

Thanks for the replies. I ordered a set from Speed Engineering, I will report back once I get the motor in

Re: LS Swap engine mounts
 

Hey flubyyou -
Yes I used them with the standard mounts and the stock bracket to the lower crossmember. Honestly I do not remember exactly which hole I used - I think it was the middle holes though . . .

Re: LS Swap engine mounts
 

Thank you Doug. I appreciate it.

Re: LS Swap engine mounts
 

https://www.m.ebay.com/itm/1967-thro...849?nav=SEARCH

Anybody used these

Re: LS Swap engine mounts
 

https://m.ebay.com/itm/LS-Swap-Gen-3...10&_mwBanner=1

Im going to get these and use them with clamshell mounts on 73-87 mounting plates.

Re: LS Swap engine mounts
 

I bought these https://www.ebay.com/itm/SR-LS1-Adap...72.m2749.l2649 and I am having trouble getting the right side engine mount bolt in .. it is off about a inch the left side bolt will go rite in been fighting for a couple hours with no luck i have set-in a few engines never had a problem like this and don't know whats going on any ideals ?? its going in my 79 k30

Re: LS Swap engine mounts
 

I have a pair of mounts if anyone is interested. Will post pics tomorrow in FS section.