'50 Model AD Radiator Support Bolts
I'm looking for the radiator support to frame cross member bolts & shims as shown on sheet 2.11 in the 47-54 Factory Assembly Manual. Apparantly in our haste to dismantle last year these items got misplaced. I've looked in the LMC catalog & online, & Bowtie Bits online and have not found these listed. I also searched The Stovebolt and can up empty.
Appreciate any help. |
Re: '50 Model AD Radiator Support Bolts
From what I remember I think I just used some long 3/8 bolts and made shims from thick hard rubber, like old tires sidewalls
These shims are a critical adjustment point for fitting the hood to the cowl |
Re: '50 Model AD Radiator Support Bolts
Here's the pads
http://www.classicparts.com/1950-54-.../#.WNBVG9IrKM8 And the bolts http://www.classicparts.com/1947-54-.../#.WNBVWdIrKM8 They use carriage bolts, which you may be able to find locally. This allows you to loosen them when everything is put together and add shims. |
Re: '50 Model AD Radiator Support Bolts
Carriage Bolts!
Any hardware store will have them! |
Re: '50 Model AD Radiator Support Bolts
Thanks jweb & solidaxel, seems like i do remember a carriage bolt.
|
Re: '50 Model AD Radiator Support Bolts
if it's anything like the tf mount there is also a tube spacer thru the rubber
this allows you to tighten the bolt without totally squashing down the rubber |
All times are GMT -4. The time now is 10:41 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com