Re: 67 long box
5 Attachment(s)
changes in progress on last cross member, added 2"x 1.75" angle and 1" square tube as the bed stop. It seems I keep adding more work, why do I do this, passion for the build.
|
Re: 67 long box
1 Attachment(s)
had to cut down the gate hold bars, looks easy but to get the amount out each half so it folds back up is a little tricky.
|
Re: 67 long box
1 Attachment(s)
tailgate link assy. shortened and they both work
|
Re: 67 long box
Nice work. I bet the build is on your mind day and night. Make sure you keep the gears oiled down because walking around with smoke coming out of your ears is never a good sight.:lol:
|
Re: 67 long box
Quote:
|
Re: 67 long box
Put another 250 lbs through the sand blaster and maybe another 200 tomorrow. That stuff gets into everything but does a nice job.
|
Re: 67 long box
A cantilevering tailgate -love- inspiring work.
|
Re: 67 long box
Quote:
Thanks Derek |
Re: 67 long box
Had to check out your madness after seeing your post on my thread...:metal:
Dig watching Metal Madmen at work… :uhmk: Tailgate mod is :jdp: Well played...:clap: |
Re: 67 long box
2 Attachment(s)
straightened the chrome and took all the dents out, looks better. Brought the frame home so I paint more parts at father in laws shop.
|
Re: 67 long box
Solid Build.
Sub'd |
Re: 67 long box
Bought another 250lbs of blasting media and more glass shard media for my blast cabinet. Cut 14 pieces of 2" tube and made spacers for the bed raise. Welded a washer on both sides, blasted, painted. Blasted some other parts, painted as well.
I had a good day. Time for a pop. |
Re: 67 long box
3 Attachment(s)
made a welding turn table, also worked for the clean up on them. Done and checked off the list.
|
Re: 67 long box
4 Attachment(s)
more painting, more blasting, more painting , more blasting, there seems to be a pattern
|
Re: 67 long box
Looks great. You are moving along nicely.
|
Re: 67 long box
Quote:
|
Re: 67 long box
1 Attachment(s)
finally decided on the trail arm ends, threw a bit of primer on it to see my finish work. ready for blast and paint.
|
Re: 67 long box
3 Attachment(s)
steering box, flywheel covers, horn , washer bottle holder, and rad saddle parts
|
Re: 67 long box
I thought that I'd blasted and painted everything and I find another pile of stuff.
|
Re: 67 long box
Quote:
|
Re: 67 long box
another 400lbs of sand through the blaster, I guess I'm painting tomorrow. Trail arms, track bar, sway bar, control arms (all 4), gas tank straps, rad saddle and the list goes on.
|
Re: 67 long box
3 Attachment(s)
blasted and painted small stuff at home last night. this is the modified cross member for the tailgate to swing under.
|
Re: 67 long box
4 Attachment(s)
rad saddle , control arms, engine cradle, and trail arms done. It's getting closer to assembly time.
|
Re: 67 long box
I propose a challenge to you sir.
Fabricate your own upper tubular control arms with corrected ball joint geometry for a 2" drop spring. Will you accept this challenge? |
Re: 67 long box
Quote:
Thanks Derek |
All times are GMT -4. The time now is 11:05 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com