The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Name that bolt/nut/screw size (https://67-72chevytrucks.com/vboard/showthread.php?t=624189)

Dale99 04-08-2014 07:55 AM

Name that bolt/nut/screw size
 
I've been having problems finding fastener information while rebuilding my ride. I thought it would nice to have all this information in one thread. Since this is the blazer/jimmy section, lets try and get mainly info for them, but info that's the same for trucks is welcome.

So, what the bolt is for, size-thread pitch, type head. Qty needed may be helpful as well.

Double wall top
visor bolt, 5/16-18, 2.375 long with 1.375 shoulder, hex, qty 2
bed bolts, 5/16-18, .875 or 1.00 long, w/washer, hex, qty 10
top to bracket, 5/16-18, .625 long, w/lock washer, panhead phillips #3, qty 4
frame to bracket, 5/16-18, 1.00 long, w/small washer, hex, qty 2
rear plate, 5/16-18, 1.00 long, hex, qty 6

Single wall top
Bed bolts, 3/8-??, ?? long

Visor bolts, 5/16-18, 1.00 long, oval head with custom .50 dia head, #2 phillips (cant find these anywhere)
gasket to top of a-post, ??? qty 6
door sill plate screws, #8x1.00 panhead #2, qty 8
Pass Seat to floor, 5/16-??, 1.00 long, qty 6
Drivers seat to floor, 5/16-??,
Rear seat to floor front bkt, ??, ??, Qty 2
Rear seat to floor rear bkt, ??, ??, Qty 4??

jaros44sr 04-08-2014 11:00 AM

Re: Name that bolt/nut/screw size
 
I have to pull my 1/2 top off to get to the windshield bolts, might take awhile as im elbow deep in my build. Ill try to get to it Saturday

Dale99 04-08-2014 01:46 PM

Re: Name that bolt/nut/screw size
 
Quote:

Originally Posted by Dale99 (Post 6618337)

Single wall top
Bed bolts, 3/8-16, 1.50 long

since I cant edit the original post :crazy:

nicosorange 04-08-2014 01:55 PM

Re: Name that bolt/nut/screw size
 
ADD:
Rear Interior Spare Tire rack to floor? qty 4,???, ???

Dale99 04-08-2014 02:12 PM

Re: Name that bolt/nut/screw size
 
If you know it, add it. Mine has the holes, but no rack or bolts.

timski69gmc 04-08-2014 03:58 PM

Re: Name that bolt/nut/screw size
 
Subscribing. I need all the rear seat bolts as well.

Dale99 04-08-2014 05:47 PM

Re: Name that bolt/nut/screw size
 
Quote:

Originally Posted by nicosorange (Post 6618896)
ADD:
Rear Interior Spare Tire rack to floor? qty 4,???, ???

7/16-20, 1.00 long, w/star washer, hex head, qty4

Dale99 04-08-2014 06:00 PM

Re: Name that bolt/nut/screw size
 
Quote:

Originally Posted by Dale99 (Post 6618337)
Rear seat to floor front bkt, 7/16-20, 1.25, hex head w/ star washer, Qty 2
Rear seat to floor rear bkt, 1/2-13, 1.75lg, .50 shoulder, hex head w/flat washer, Qty 4

Quote:

Originally Posted by timski69gmc (Post 6619085)
Subscribing. I need all the rear seat bolts as well.

..

Dale99 04-08-2014 06:58 PM

Re: Name that bolt/nut/screw size
 
Quote:

Originally Posted by Dale99 (Post 6618337)
gasket to top of a-post, ??? qty 6

Actually got one out w/o messing up threads. 1/4-20, roughly .50 long, pan head??

timski69gmc 04-09-2014 12:38 AM

Re: Name that bolt/nut/screw size
 
Awesome, thanks! I am sure I will think of more.

Dale99 04-09-2014 06:53 AM

Re: Name that bolt/nut/screw size
 
This was meant for everyone to post what they know. But since I need help, I help others back.

jc06vmax 04-09-2014 08:56 AM

Re: Name that bolt/nut/screw size
 
Sub'd. Great post.

Dale99 06-10-2014 07:53 AM

Re: Name that bolt/nut/screw size
 
Visor to windshield post screw
5/16-18 jackson panhead phillips screw, around .75 or 1.00 long. Very hard to find, however thanks to user bluek5, he found a place here. At the moment they are out, but I have a feeling if many people start placing an order, some will come into stock.
http://www.msc-stainless-fasteners.c...on-screws.html


Anyone know what screw is used to hold the hatch handle to the hatch?

DeadheadNM 06-13-2014 08:21 PM

Re: Name that bolt/nut/screw size
 
2 Attachment(s)
Good idea for a thread! Pics are a huge help and salvage yard trucks are a wealth of OEM screw/bolt info with regard to type, size, and finish.

Here's the correct bolt w captured washer to affix the e-brake bracket at the dash. Pics show one I just had Parkerized and another installed.

There are a few other such unique bolts/screws I can think of, will try to post more.

tjsblazer 06-13-2014 09:08 PM

Re: Name that bolt/nut/screw size
 
This is a great thread idea. Subscribed. I'll contribute where I can.

DeadheadNM 06-13-2014 09:40 PM

Re: Name that bolt/nut/screw size
 
4 Attachment(s)
More unique screws/bolts: 12 point screw to attach the hood latch to rad support (note the cool anchor on the head! - not all had these), Phillips head screw to attach the door latch, and trim screw/ferrule to attach a 72 door panel all shown in correct finish

Dale99 06-14-2014 08:55 AM

Re: Name that bolt/nut/screw size
 
I wondered how the ebrake release was attached. Mine just flops around. Now I know :)

DeadheadNM 06-14-2014 08:24 PM

Re: Name that bolt/nut/screw size
 
2 Attachment(s)
Example pics of the screws used to affix the cowl: stainless on top, Parkerized with a captured washer (same as those used to affix the glove box hinge to the dash) under the hood at the cowl to hood seal.

Dale99 06-14-2014 10:25 PM

Re: Name that bolt/nut/screw size
 
deadhead, could you post thread size and lengths on some of these?

Specifically, I'm interested in the one for the ebrake setup. But would like all of them for others restoration projects, even if they cant get the originals. Atleast some off the shelf.

DeadheadNM 06-14-2014 10:48 PM

Re: Name that bolt/nut/screw size
 
Quote:

Originally Posted by Dale99 (Post 6721365)
deadhead, could you post thread size and lengths on some of these?

Specifically, I'm interested in the one for the ebrake setup. But would like all of them for others restoration projects, even if they cant get the originals. Atleast some off the shelf.

Would if I had any clue :)

DeadheadNM 06-15-2014 12:00 AM

Re: Name that bolt/nut/screw size
 
2 Attachment(s)
Correct (non)finish on the 9/16" bolts for the door striker plates, which use star washers

Dale99 06-21-2014 05:22 PM

Re: Name that bolt/nut/screw size
 
Can anyone hook me up with specs for the original hatch handle screws?

Dale99 06-23-2014 09:12 AM

Re: Name that bolt/nut/screw size
 
could also use info on the correct gravel guard nuts/bolts.

DeadheadNM 06-23-2014 11:11 PM

Re: Name that bolt/nut/screw size
 
Quote:

Originally Posted by Dale99 (Post 6730228)
Can anyone hook me up with specs for the original hatch handle screws?

Quote:

Originally Posted by Dale99 (Post 6732380)
could also use info on the correct gravel guard nuts/bolts.

I'll dig these out and post pics...

Dale99 06-24-2014 07:07 AM

Re: Name that bolt/nut/screw size
 
Ty


All times are GMT -4. The time now is 10:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com