Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Hey everyone. Been lurking around here for a long time stealing ideas and getting advice. Thought it was finally time to share my project with yall. I set out a few years ago to find a patina'd short bed truck. After many months of searching I finally found one. 1970 C10 short bed, good patina. Fairly solid truck. Started working on it, but life got in the way and I had to sell it.
https://jtshores.smugmug.com/Blucill...IMG_0650-L.jpg Fast forward a couple of years and I was ready to find and start on another truck. I tried to buy the blue '70 back but the guy just didnt want to sell it. Cant say that I blamed him. So my search continued. I had a friend that had a '68 short bed that he had lost interest in. We agreed on a price and I brought home. It wasnt much to look at it. But it was a start. https://jtshores.smugmug.com/Blucill...0/XL/746-L.jpg https://jtshores.smugmug.com/Blucill...0/XL/747-L.jpg https://jtshores.smugmug.com/Blucill...0/XL/744-L.jpg They had taken the bed and the firewall of the cab down to bare metal so I knew the truck was solid everywhere. Had the entire suspension sand blasted and painted. But it was a long bed frame that had been cut down. I wasn't crazy about that so I found a true SWB frame to start with. https://jtshores.smugmug.com/Blucill...XL/1461-XL.jpg Couple of long nights, a bunch of cut off wheels and a few air hammer chisel and punches later and voila! We were ready for Porterbuilt. https://jtshores.smugmug.com/Blucill...XL/1485-XL.jpg |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
A call to Nate and Dave at Porterbuilt and three agonizing months later, it all shows up.
https://jtshores.smugmug.com/Blucill...5%20128-XL.jpg I was as giddy as a school girl when I got all of this. I'm running level 3 dropmembers front and rear with Ridetech coilovers. Couple days later. I had a rolling chassis. https://jtshores.smugmug.com/Blucill...5%20640-XL.jpg |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Started looking for a 6.0 and got lucky and found a LS2 for a good price. And started ordering some goodies.
https://jtshores.smugmug.com/Blucill...XL/1264-XL.jpg https://jtshores.smugmug.com/Blucill...MG_3966-XL.jpg The motor is getting stage 2 turbo cam from tick performance, Comp pushrods and dual valve springs, melling HV oil pump, ARP everything. |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Cool build!
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Im in .
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Got the LS2/4L60e put in.
https://jtshores.smugmug.com/Blucill...MG_2444-XL.jpg https://jtshores.smugmug.com/Blucill...MG_3137-XL.jpg But then plans changed and someone talked me into building a turbo motor. So I ditched the 4L60e and the trailing arm crossmember for a 4L80e and PB's inner frame stiffener. https://jtshores.smugmug.com/Blucill...MG_3314-XL.jpg UPS decided I needed a custom bend in one of the IFS mounting points. https://jtshores.smugmug.com/Blucill...MG_3320-XL.jpg Got the IFS and 80e in. https://jtshores.smugmug.com/Blucill...MG_3323-XL.jpg https://jtshores.smugmug.com/Blucill...MG_4082-XL.jpg |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Nice project keep the updates coming
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Glad you finally started a build page, :D!
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Damn gotta watch this.
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
And then it was onto the fuel. I gave Travis a call at azproperformance and he got me set up with a Boyd welding tank with an Aeromotive a1000 in it. Should be more than sufficient for the turbo. Running AN-8 supply and return.
https://jtshores.smugmug.com/Blucill...MG_2449-XL.jpg I wanted the tank to be a little higher than just riding on top of the frame rails. So I found some bushings from energy suspension that would help with that. https://jtshores.smugmug.com/Blucill...MG_2486-XL.jpg https://jtshores.smugmug.com/Blucill...MG_2502-XL.jpg Then it came time to run the fuel lines. Enter a lot of google searching for how to run the fuel lines. Most everyone I've seen has ran them on the outside of the notches. And as I found out for good reason. But I wanted them hidden for the most part and knew that the only way I could do this was to go through the notch. I'll be the first to say that this was a pretty big pain in the ass and fairly expensive mod. I found some bulkheads from Russell and they worked great. https://jtshores.smugmug.com/Blucill...MG_2508-XL.jpg https://jtshores.smugmug.com/Blucill...MG_2522-XL.jpg https://jtshores.smugmug.com/Blucill...MG_2523-XL.jpg |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Im in to watch this one!!
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Looking good. The boyd tanks are nice. When you get a chance could you measure the distance from the top of the mounting bracket on your tank to the top of the tank? I just want to know how high above the frame the top of the tank will be. Thanks man, I hope it's not too much trouble.
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Quote:
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Quote:
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Decided on a set of wheels (for now anyways). Gotta save my pennies for a set of billets lol Boss 338 20s and 22s
https://jtshores.smugmug.com/Blucill...MG_2978-XL.jpg https://jtshores.smugmug.com/Blucill...MG_2979-XL.jpg And after searching for what seems like forever trying to pick a set of tires out, I settled on Dunlop 255/35/20 and 265/35/22. https://jtshores.smugmug.com/Blucill...MG_3117-XL.jpg |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Wow! I'm definitely watching this build! I can't wait to see how it progresses! Looks great!
Joe |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Very nice looking Chassis! Subscribed!
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
wow. looking good, awesome build!
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Quote:
Quote:
Quote:
Quote:
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
I'm in! Killer looking frame.
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
The frame mock up is pretty much done at this point.
https://jtshores.smugmug.com/Blucill...MG_3429-XL.jpg https://jtshores.smugmug.com/Blucill...MG_3436-XL.jpg https://jtshores.smugmug.com/Blucill...MG_3412-XL.jpg https://jtshores.smugmug.com/Blucill...MG_4083-XL.jpg |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Now it came time to put the body on. And I drug my feet heavily when it came to this. Not that I didn't have a solid truck because I did. But I just couldn't get excited about the truck body that I did have. It wasn't what I wanted. So the search was back on to find a patina short bed truck. Many months of searching and absolutely no luck. I was starting to get a little discouraged. The whole time I was building the chassis, the blue truck was in the back of my mind. Kicking myself for ever selling it, I kept thinking it would be awesome to have it back. Well luckily I sold it to a guy that was fairly local to me. So I call him up one day and ask him if he wanted to sell it one last time. (probably asked him a dozen or more over the last couple of years lol) And once again, he shot me down. I had one last hail mary for him. I told him I would trade him the '68 body that I had for the blue truck body since I had already built the suspension and he had already built his as well. After what seemed like a lifetime over the phone, he agreed on that. OH HAPPY FREAKIN DAY!!!! I was giddy as a school girl. The blue truck was coming home!!!!
https://jtshores.smugmug.com/Blucill...MG_3413-XL.jpg https://jtshores.smugmug.com/Blucill...MG_3416-XL.jpg |
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
That blue truck has perfect patina. I can't wait to see it sitting on your frame. Badass!
|
Re: Project: Boosted Blucille. '70 C10 SWB PB Fab, LS2 S475
Cool you got that one back. What size are your new tires?
|
All times are GMT -4. The time now is 08:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com