The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   General Discussion (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=15)
-   -   Looking for my dads first truck (https://67-72chevytrucks.com/vboard/showthread.php?t=730562)

Bladesmith16 02-16-2017 01:33 PM

Looking for my dads first truck
 
Hello everyone i was hoping yall could be of some help. My dad had a 1972 chevy c10 2wd short wheelbase green paint 350 engine similar to the one that special-K posted it is the top truck in this forum 62-72chevytrucks.com/vboard/showthread.php?t=565353 all other info i have is the tag number.

LockDoc 02-16-2017 02:55 PM

Re: Looking for my dads first truck
 
-
Welcome to the board.

Is this the thread?

http://67-72chevytrucks.com/vboard/s...d.php?t=565353

It is usually like looking for a needle in a haystack. The more info you can post the better your chances are. Approx when it was sold, what part of the country, etc.

If you have a plate number sometimes you can get some old title info (VIN # and stuff from the DMV) which would also help.

LockDoc

Bladesmith16 02-16-2017 03:01 PM

Re: Looking for my dads first truck
 
Thanks for the info LockDoc. I would say it was sold in the late 80s or early 90s it was sold in Dalton, Georgia. But from word of mouth it was wrecked and was in a junk yard but not sure. I am not sure on how to and who to contact to find info with the tag number.

LockDoc 02-16-2017 03:07 PM

Re: Looking for my dads first truck
 
Quote:

Originally Posted by Bladesmith16 (Post 7860884)
Thanks for the info LockDoc. I would say it was sold in the late 80s or early 90s it was sold in Dalton, Georgia. But from word of mouth it was wrecked and was in a junk yard but not sure. I am not sure on how to and who to contact to find info with the tag number.

Around here the tag info would be at the courthouse. I know GA doesn't require titles for the older stuff but if you took the old plate number in to where you register your vehicles they may be able to see if it has been junked. Worth a try anyway.

LockDoc

Bladesmith16 02-17-2017 10:01 AM

Re: Looking for my dads first truck
 
Thanks LockDoc will try the courthouse.

Bladesmith16 02-17-2017 10:15 AM

Re: Looking for my dads first truck
 
LockDoc how do you add a pic to a post from a computer

LockDoc 02-17-2017 11:27 AM

Re: Looking for my dads first truck
 
Quote:

Originally Posted by Bladesmith16 (Post 7861540)
LockDoc how do you add a pic to a post from a computer

When you are in the message window typing your message there is a paper clip up above the message box (between the Smiley face and two little curved arrows). Click on that and a box will pop up so you can upload a picture from your computer. Click on one of the "Browse" buttons and locate the picture you want to upload. Highlight the picture and click on the "Open" button, then click on the "upload" button, after it uploads close that window and it will take you back to your message.. You can actually upload up to 5 pictures at a time just by clicking on the next browse buttons before you upload the pictures.

If you get an error about a "Token Error" it means that your pictures are too big and you will have to size them down before uploading. I usually size mine down to 1150 pixels in width.

LockDoc

Bladesmith16 02-20-2017 09:30 AM

Re: Looking for my dads first truck
 
2 Attachment(s)
Thanks for the help LockDoc. Here is some pics of the truck.


All times are GMT -4. The time now is 04:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com