WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

I’m looking for left A-Pillar inner & outer assembly from top to Cowl for my 64 C20. Have rust on most of lip up top and down the interior bout 10-14 inches where the pinch weld and resulting seal mounting surface is pretty cruddy. If anyone has a cab thats willing to slice a part, I’d appreciate it. There are no repop panels I can find and considering my rockers are 100% fine, this leak only hit this area and the floor in the corner just a bit, si I’m counting myself pretty lucky...kinda

Any advice is also welcomed. I’m fairly new to this year(s) and how to attack rust where the 67-72 and on have panels available. Thanks

Anyone know if pick-a-part will let me sawzall a piece? TV

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

You can get a pillar from any 64-66 cab

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Thanks for the response. Wonder if pick-a-part will run me off when I pull out a sawzall?

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Nope, they won’t sell a vehicle to be put back on the road so cut anything you want.

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

I have several 64- 66 Chevy cabs I am cutting. I get $40 and up for custom cuts. I would have to know exacty where you want it cut and inspect mine to make sure it is good. Thanks

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Let me take a picture and I’ll pm you. Sound good?

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Sure , sounds. good . I made a few cuts yesterday but -19 below Sunday eve and -22 below Monday eve . Pretty sure my diesel will not start those two days . But starting on Wednesday a gradual warm up and could cut then. Thanks

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

I have some good cabs for sale if that would save some money and time.

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Honestly if Cru zn 29 has a good cab close to you that is the way I would go. Depending in the condition of the rest of your cab . I can still cut a pair but sometimes a good cab saves a lot of time and money .

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Hey Cruzn29, how much are you asking for a fair condition cab, I believe 63-66 will work...I was looking for the pillars because since I’m Covid unemployed, cost does play into my decision. Would you consider a partial trade, my cab is great, except for this a Pilar issue and minimal floor rust. My rockers are 90% and dash is 100% virgin, economy air and can send pics, but understand if you’re just wanting to clear out your inventory...you’re not too far, so it would be nice to meet a local member too. Thanks. Tony

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Thanks for the advice Paul. If it doesn’t work out for entire cab, I’ll send you detailed, measured/noted pics of necessary area. Much appreciated. Tony

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Cru_zn_29, what’s the pricing on your cabs? Sure would save lit of work but I need to get project moving and this is holding me up....let me know. Thanks.

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Paul, looks like I’ll get you some pics. Seems that Cru_zn_29 is not a regular poster and I’ve got to get this pig running and start enjoying her. I’ll look for a drawing I made for another person but I screwed that one up being a rookie at metal repair. Much better now. Stand by for pic. Thx

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Does this give you an idea of what I’m needing? Let me know price...be gentle, I’m on the Covid payroll with the State of California Unemployment Office and they only pay sporadically if at all. Let me know and we can get this done. Tony

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

60 61 62 63 are the same 64 65 66 are the same

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Yes, I’m wanting to know your pricing??

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

Paul, here’s a quick couple from my LHS. I’ll post more detailed with measurements so we’re 100% on the same page. Enjoy....LOL

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

1960 1961 1962 1963 are the same 1964 1965 1966 are the same

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

If you’re selling, h.ow much is your price? That’s all I’m trying to get here.

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

The first time you asked the price and I told you 650.00 The price is still the same.

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

No price in this thread. I’ll pass.....

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

I don't understand that i did not send the price. I have sent the asking price 3
times in 3 E Mails ($650.00)

Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability
 

It looks like on 1/29/21 Ken accidentally posted the price on a thread by short 3/4 in regards to a roof replacement so you’re both right