500 c.i. cadillac in a 82 chevy truck
 

i have an 82 chevy truck that needs a motor. i have a friend that has a 500 c.i. cadillac motor i can have to put in the truck. has anyone done this in a truck? if so what problems will i encounter or is it a fairly easy swap? thanks for the help.

Re: 500 c.i. cadillac in a 82 chevy truck
 

a few have done it.the only problem is going to be them back tires

Re: 500 c.i. cadillac in a 82 chevy truck
 

if that's going to be my biggest problem i can handle that. and like your sig says, i like to "think outside the box" when it comes to my cars(and trucks).

Re: 500 c.i. cadillac in a 82 chevy truck
 

thanks i got that from tacobell lol and becuse are trucks are a BOX

Re: 500 c.i. cadillac in a 82 chevy truck
 

A few people have done the swap. its not terribly difficult. you need to find a bop transmission bc the caddy bellhousing is different but they arent terribly scarce. also the motor mounts have to be changed

Re: 500 c.i. cadillac in a 82 chevy truck
 

trans adapter and motor mounts here, you will have to get a rear sump oil pan unless you already have one.
http://www.cad500parts.com/

Re: 500 c.i. cadillac in a 82 chevy truck
 

Re: 500 c.i. cadillac in a 82 chevy truck
 

You can bump the HP and torque with a new cam. Visit this site: http://www.500cid.com/

The 500 is lighter than a 454! Do everything you need to do do the driverside valve cover. Once the engine is installed, you can't remove it. You may have to grind the brake boost a tad for clearance. Advance adaptors has a transmission adaptor.

Re: 500 c.i. cadillac in a 82 chevy truck
 

thanks for all the help. the motor is supposed to have a transmission with it. how good that is i don't know.

suville i will send you and email. i'd like to get some pics and info from someone that has done this. i'm glad to hear that it should get decent gas mileage. it's not a truck that i'll be driving much but it's good to have decent mpg.

right now it has manuel brakes so maybe i should look into a small brake booster when i go to power brakes.

i'll have to check out the web sites and see what i can find for this project.

Re: 500 c.i. cadillac in a 82 chevy truck
 

This swap is fairly easy. I'm doing the same swap in my '86. All I did for the mounts was flip the sbc mount perches to the opposite side of the frame. This will angle them forward. You will have to do some trimming to the perches to clear your steering. Once that is done, you can mount stock cadillac mounts to them and the Cad motor will drop right in. You will need to trim the pinch weld between the firewall and the floor to clear the driver's side head. I got pics around somewhere. I'll try to get some up.

Re: 500 c.i. cadillac in a 82 chevy truck
 

Here are the pics I have from mock up.

http://i82.photobucket.com/albums/j2...ownyirp012.jpg
This is a stock eldorado mount bolted to the sbc perch. I had to trim one mounting tab off to clear the sterring.


http://i82.photobucket.com/albums/j2...ownyirp003.jpg
You can see how close it comes to hitting the stock brake booster. I'll probably get a smaller one someday.

http://i82.photobucket.com/albums/j2...oto/crap-1.jpg
You can see where I trimmed my firewall for the driver's side head. (I still need to stitch it back up)

Re: 500 c.i. cadillac in a 82 chevy truck
 

I'd kill to have a caddy engine in my truck. My dads old 69' stepside had a 472 and the caddy disc rearend in it.

Re: 500 c.i. cadillac in a 82 chevy truck
 

I've always wanted to do this swap because I think a 500 inch Caddy motor would be great in a truck, especially if you pull a trailer.

The pics on the motor mounts are very helpful. You've gotta love GM and the way they make most of their interchangeable. Definately can't say that about Fords.....You had better know the MONTH your vehicle was made when you go to the parts store. Example: They made a 351 Cleveland, a 351 Windsor, and a 351M, and very few of the parts interchange between them.

That's why I have always owned GM trucks.

Re: 500 c.i. cadillac in a 82 chevy truck
 

If you are getting the trans with the engine it will have a 13" tailshaft on it. so you will have to have the driveshaft shortened.
http://67-72chevytrucks.com/vboard/s...ad.php?t=20020

Re: 500 c.i. cadillac in a 82 chevy truck
 

Re: 500 c.i. cadillac in a 82 chevy truck
 

you're not kidding about the ford stuff. i've always had chevy stuff and a couple of years ago i decided i wanted something different and bought some ford stuff and you really have to know what you have and what it will match up with because their products aren't user friendly. i still want something different, that's why i'm thinking about the caddy motor in my chevy truck. ya are giving me alot of good info.

Re: 500 c.i. cadillac in a 82 chevy truck
 

Here are some pictures of my dads old truck.

Re: 500 c.i. cadillac in a 82 chevy truck
 

ive seen many 455 buicks swapped also

Re: 500 c.i. cadillac in a 82 chevy truck
 

David Freiburger did that when he was editor at Car Craft over a dozen years ago but the recipient was an El Camino.

The project goals were pretty much how fast for how cheap can we go. They pulled a Caddy engine out of a running rust bucket, gave it nothing more than a rattle-can rebuild and put it in the Elky. I don't recall what it ran but traction was a big issue.

Re: 500 c.i. cadillac in a 82 chevy truck
 

that's a cool truck. am i looking at it funny or is there something up with the grill?

Re: 500 c.i. cadillac in a 82 chevy truck
 

Friend of my next door neighbor (old school hot rodder) has this caddy in his Chevy truck
http://img532.imageshack.us/img532/2269/hpim0164jt5.flv

Re: 500 c.i. cadillac in a 82 chevy truck
 

thanks for the picture but i could not open it. it just says file not found.

Re: 500 c.i. cadillac in a 82 chevy truck
 

Sorry about the video
Here is a photo
http://img294.imageshack.us/img294/2618/hpim0141hs6.jpg

Re: 500 c.i. cadillac in a 82 chevy truck
 

thanks, that is much better. that is one pretty motor there.

Re: 500 c.i. cadillac in a 82 chevy truck
 

Grand torino grill I believe 2 inch chop caddilac tilt teloscopic steering column billit dash autometer gagues caddilac door handles torino bucket seats mahogony bed floor caddy 472 with a th400 tranny shift kit disc brake caddy rear end. Custom front bumper dimond pressed tail gate and louvered hood. If memory serves me correct. It was a real hotrod his biggest problem was getting it to hook up on launch.