The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Door Jamb Wire Loom or Boot (http://67-72chevytrucks.com/vboard/showthread.php?t=779100)

First c10 01-07-2019 03:23 PM

Door Jamb Wire Loom or Boot
 
Hello all,
I am wanting to install a Door Jamb wire loom/Boot from the A pillar to the door for door lock/power window wiring. I have searched and have not found what i want. Can someone post a link and or picture so i can make up mind????
Thank you guys!!!

First c10 01-07-2019 03:40 PM

Re: Door Jamb Wire Loom or Boot
 
I think I used some out of a van but that was years ago and cant find any info on the site!

Sheepdip 01-07-2019 03:40 PM

Re: Door Jamb Wire Loom or Boot
 
https://www.speedwaymotors.com/Speed...YaAp9bEALw_wcB

Grumpy old man 01-07-2019 04:15 PM

Re: Door Jamb Wire Loom or Boot
 
https://www.summitracing.com/parts/eli-4301-70-011

https://www.ebay.com/itm/94-99-LAND-...3842389:chevy:

https://www.amazon.com/Keep-Clean-10.../dp/B00H8JW4FK

First c10 01-07-2019 05:34 PM

Re: Door Jamb Wire Loom or Boot
 
I have seen all that you guys have posted thank you. has anyone used any of these??? pictures and comments?

Sheepdip 01-07-2019 08:34 PM

Re: Door Jamb Wire Loom or Boot
 
Well to save time why don't you tell us what you want or are after.

Greasey Harley 01-07-2019 08:46 PM

Re: Door Jamb Wire Loom or Boot
 
I am a fan of Pull-N-Save for items like that. OEM quality and thrift store prices.
I couldn't tell you exact models, but I have successfully installed wire loom protectors onto rigs that didn't come with them. Usually cost me like a buck ...sometimes they just give me little stuff like that.

First c10 01-07-2019 10:47 PM

Re: Door Jamb Wire Loom or Boot
 
Quote:

Originally Posted by Sheepdip (Post 8438823)
Well to save time why don't you tell us what you want or are after.

Looking for options. I see the ones online but how do they actually look and work? The sales photos look good but I am looking for real life photos and recommendations.

It is for my hulk build so I want something that looks new custom or so stock you donít even see them or know they are there.

First c10 01-07-2019 10:48 PM

Re: Door Jamb Wire Loom or Boot
 
Quote:

Originally Posted by Greasey Harley (Post 8438831)
I am a fan of Pull-N-Save for items like that. OEM quality and thrift store prices.
I couldn't tell you exact models, but I have successfully installed wire loom protectors onto rigs that didn't come with them. Usually cost me like a buck ...sometimes they just give me little stuff like that.

Great idea. Maybe I will take a look this weekend. Thank you

Sheepdip 01-07-2019 11:30 PM

Re: Door Jamb Wire Loom or Boot
 
They make these wireless from jam to door type but the only problem is when the door is open nothing works.

Never have used them myself, but I've seen them on a few builds. Personally I think after awhile the contact surfaces might fail.
https://autoplicity.com/3446353-keep...UaApDnEALw_wcB

First c10 01-08-2019 12:30 AM

Re: Door Jamb Wire Loom or Boot
 
I thought about them but haven’t found anyone that has actually used them.

kolle_hond 01-08-2019 06:29 AM

Re: Door Jamb Wire Loom or Boot
 
I made a video of my door jamb switch install. I have not done many videos before, so sorry about the quality and editing: https://www.youtube.com/watch?v=rqjlVkCcwLE

renegade6 01-08-2019 10:56 AM

Re: Door Jamb Wire Loom or Boot
 
This one looks stock:

https://www.nu-relics.com/Conduit-s/188.htm

First c10 01-08-2019 11:33 AM

Re: Door Jamb Wire Loom or Boot
 
Quote:

Originally Posted by kolle_hond (Post 8439105)
I made a video of my door jamb switch install. I have not done many videos before, so sorry about the quality and editing: https://www.youtube.com/watch?v=rqjlVkCcwLE

Kolle_hond, Great video!! Cool right hand drive truck. I haven't seen too many! I know this is off topic but I have a thread about the windshield wipers and the alternate wiper arm link positions. my cowl has a place for a wiper arm mount on the passenger side that is not used on a left hand drive truck. Do you mind posing a picture or 2 of your cowl and wiper locations for us all to see in my other thread???


http://67-72chevytrucks.com/vboard/s...d.php?t=779147

First c10 01-08-2019 11:34 AM

Re: Door Jamb Wire Loom or Boot
 
Quote:

Originally Posted by renegade6 (Post 8439177)

Damn I looked at that site and didn't see those. Has anyone tried them I didn't see a length? I think I may order them.

70STOVEBOLT 01-08-2019 10:14 PM

Re: Door Jamb Wire Loom or Boot
 
1 Attachment(s)
I have the Nu-Relics looms. I bought them off eBay and did not know the brand st that time. They work very well. Here is a pic, sorry itís sideways.

First c10 01-08-2019 11:36 PM

Re: Door Jamb Wire Loom or Boot
 
Great Thank you for the picture.

70STOVEBOLT 01-08-2019 11:39 PM

Re: Door Jamb Wire Loom or Boot
 
I have a factory style power window harness and an aftermarket power lock harness running through it.

dmjlambert 01-09-2019 09:28 PM

Re: Door Jamb Wire Loom or Boot
 
I like how the Nu-Relics ones look. Is there any method or tool for drilling nice round holes for it without removing the doors?

70STOVEBOLT 01-09-2019 09:53 PM

Re: Door Jamb Wire Loom or Boot
 
1 Attachment(s)
I used the craftsman 19.2 volt drill with a hole saw in the pic. It was tight but it worked.

sprint_9 01-10-2019 08:06 PM

Re: Door Jamb Wire Loom or Boot
 
2 Attachment(s)
Im using Nu-relics, all I have is a mock up, and a side shot without the door, I havent yet mounted the doors.

TxGary 01-10-2019 10:05 PM

Re: Door Jamb Wire Loom or Boot
 
1 Attachment(s)
I got mine from GM parts, there off a 2003 GMC Ex cab door.

70STOVEBOLT 01-10-2019 10:45 PM

Re: Door Jamb Wire Loom or Boot
 
How do those attach? Is there a groove like the Nu-relics type?

First c10 01-11-2019 02:20 AM

Re: Door Jamb Wire Loom or Boot
 
Great ideas and mounting location pictures. I have ordered a set of the nu-relics. But I like the ex cab ones. How large of a hole do they need?

TxGary 01-11-2019 07:25 PM

Re: Door Jamb Wire Loom or Boot
 
Yes there was a groove on each end. I do not remember how big of a hole i drilled. I did use a unibit to drill the holes.They fit good tight. GM part # 15326220


All times are GMT -4. The time now is 08:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com