The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   47-55.1 Specialty Power Window kit (http://67-72chevytrucks.com/vboard/showthread.php?t=779335)

8man 01-11-2019 04:24 PM

Specialty Power Window kit
 
Got my Specialty Power Window kit test fit in the door. I wanted to see what had to be done so I could do any patches or repair after it was test fit.

It went in ok, but there is a bolt head that sits on the inside of the door about 10" down from the bottom of the window, when rolled up.

Has anyone installed this kit, and if so, what did you do to camoflauge that bolt in the middle of the door?

Thanks.

mr48chev 01-11-2019 08:23 PM

Re: Specialty Power Window kit
 
Swapping the hex head for a round head machine screw would help an maybe using one that uses an allen wrench would make it easier to tighten. Paint it the same color as the door and it might not show up too much.

8man 01-11-2019 11:08 PM

Re: Specialty Power Window kit
 
Thanks. That's probably what I'll have to do.


All times are GMT -4. The time now is 04:56 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com