Re: 1972 Jimmy + 5.3/4L60E/NP205
 

Ens-3-1106r - trans mount
ens-3-1107r - t-case mount
ens-3-4110g - body mounts

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

I'm using the Entropy radiator as well on my swap....do you have the part#s of the radiator hoses that you used...? thanks

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

I will look thru my receipts tonight and post up what I find.

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

much appreciated...no hurry...thanks!

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

Oreilly Part Numbers for the radiator hoses.

GAT - 22437
GAT - 21439

I know I had to trim one a little bit to make it fit, but other than that they work perfect.

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

IIRC you mentioned moving the motor forward 2 inches....is there room to move it 3" ?


I finished my mount and I about to set it all in place...

I bought some Energy Suspension universal poly bushings and sleeves....
Attachment 1636623

Got the frame mounts bent up.....snug fit in the frame rails......
Attachment 1636625

[ATTACH]1636626[/ATTACH

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

I forget if mine was 2" further forward or not, but it sits pretty tight to my firewall. There is all kinds of room left up front though. I have Entropy with dual fans and I can "almost" still run my old clutch fan on the front if needed to. So there is that much room still.

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

Nice build, just got done going through the whole thing looking for more gas tank pics. Also, great info for my future plans for an LS swap. How's the Jimmy doin?

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

Thanks, she is doing good. I think she turned over 2k miles since the swap and zero issues. Keep us updated on your swap. Don't hesitate to ask questions.

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

Great build! Always enjoy getting motivation and ideas from others on here.
Are you running a factory console? Would you posting a few pics of the front seats? I was thinking of running those but recovering to look more original with no headrest.

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

Quick question for you. In post #30 it looks like you might have had to clearance the frame to fit the big Doug Thorley headers. Am I seeing things, or did these fit without modification? Thanks

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

you are 100% correct. For whatever reasons, I needed to shave a sliver off the frame rail. They "fit" before I modified anything but it was a little too close for comfort so I shaved it down a bit.

Re: 1972 Jimmy + 5.3/4L60E/NP205
 

Nice build, I always go back to look at pics, just for the bling and shine