Re: 55-57 one piece windows
 

are you still trying to burn the vid on dvd?

Re: 55-57 one piece windows
 

no, im trying to upload it all to the internet so i dont have to mess with shipping anymore

Re: 55-57 one piece windows
 

Re: 55-57 one piece windows
 

okay, i think i have them up. should be in order too. i havnt watched it through (ive seen it till im blue in the face) but dad says that when i was editing them into smaller vids i cut out a peice. so MAKE SURE you go back and read post 59 and post 67 on this thread and DO THIS STEP!!! it is very important. ill go through and watch them agian later, to make sure i didnt leave anything else out

Re: 55-57 one piece windows
 

i uploaded the part that got left out

Re: 55-57 one piece windows
 

where is the part that we have to trim on post 61 is it just grinding down a little bit or do we have to cut it?

Re: 55-57 one piece windows
 

oh i almost forgot thanks for all this that you have done hopefully a lot of people watch it and learn from it.

Re: 55-57 one piece windows
 

the peice he circled is what needs to be cut off and threw away. look @ video number 3 @ 1:58 minutes. that is the peice that attaches the glass to the track on the regulator.

also, when your @ the glass shop make sure to pickup a couple feet of window tape. it is used to put the glass into the peice your reffering too.

Re: 55-57 one piece windows
 

o okay i get it now i was wondering where that went lol anyways would you happen to have any extra parts laying around for me to be able to complete my windows like the extra part that has to get welded where the wheels are. If you don't mind shipping it to me ill pay for it if you want.

Re: 55-57 one piece windows
 

I just watched all the videos and my questions were answered, good job. Did you say you were going to make a pdf file of the glass template? I assume the glass mounts in the same location on the track relative to the rear side of the door with the extra glass just hanging out the front end?

Re: 55-57 one piece windows
 

yessir & yessir

Re: 55-57 one piece windows
 

not sure if i have another track or not. ill try to remember to look

Re: 55-57 one piece windows
 

okay thanks man i glad i started the thread for the one piece windows haha its been benefiting to everyone.

Re: 55-57 one piece windows
 

They repop those if you look in lmc or classic. they call it - Door upper guide rail or door glass cam channel

Re: 55-57 one piece windows
 

Videos turned out great Brian. Thanks again for putting up with me. :lol:

Re: 55-57 one piece windows
 

Great job on the videos guys, i think i may want to do it to my project, Thanks.

Re: 55-57 one piece windows
 

thanks grimss ill look for it

Re: 55-57 one piece windows
 

One thing you might want to do is cover your glass with some shelf paper. It's low tack and peels off easy when your done. It will save you from any scraches.

Re: 55-57 one piece windows
 

where can you get that? I have started to rip everything out my door and noticed that the glass is actually two like glued together i founf that pretty interesting for the eng. of that time lol

Re: 55-57 one piece windows
 

Did you get my PM ?? I'm on board for this!!! Lemme know how to get all the goodies from you.

Re: 55-57 one piece windows
 

Grimss is going to up load the template in a PDF file so we don't have to mail it out because we have so many people wanting it. Plus for people in the future. This could go on for a long time, and could run in to problems down the road. he said he will get it done next week. If he can't, we will go back to the old way. Brian

If you want the chrome beads on the felts like grimss has, call up Fannin Auto Glass in Springfield, Mo @ 417-869-4096

the track that holds the glass in is Y630P-96. you will need two of these, in 8 foot sticks.

the felt sweepers are YM54R-96 HALF-GUIDE. these come in 8 foot sticks i think, but one isnt enough.

Re: 55-57 one piece windows
 

IC. Thanks again for being awesome.

Re: 55-57 one piece windows
 

Here is the company that makes the channel and door sweeps they have an order line might be cheaper to buy in bulk


http://www.stanpro.com/Product.aspx?...Id=%2075000194

http://www.stanpro.com/Product.aspx?ProductId=75000130

Re: 55-57 one piece windows
 

didnt check their prices, but im sure they will be better. the glass shop i used probably isnt set up for shipping this stuff. if you can go to a car show or swap meet you can pick the stuff up for 10-15 bucks a stick instead of 25-30.

Re: 55-57 one piece windows
 

about how long did it take for anyone to get their glass done and to them. Because i been going around and everyone keeps telling me two weeks or a little less for the temp glass. Did anyone use laminated glass?