Re: cab corner 6x9 speaker brackets
 

Seat goes all the way back, no problem. I sent you a PM.

Re: cab corner 6x9 speaker brackets
 

Just got mine in the mail. Awesome quality, shipped quick. Can't wait to get them installed!

Re: cab corner 6x9 speaker brackets
 

Got another truck so I need another set of these if you got some, hopefully with the hole cut out. Lemme know!

Re: cab corner 6x9 speaker brackets
 

PM sent, 1 pair please!

Re: cab corner 6x9 speaker brackets
 

Can I get a pair of these without the hole, just blanks ?

Re: cab corner 6x9 speaker brackets
 

Can I get a set?

Re: cab corner 6x9 speaker brackets
 

Interested in a set for an 85 step-side. Can do and how do I get $$$$ to you ?

Thanks,

Illmanners

Re: cab corner 6x9 speaker brackets
 

PM me when these are in stock.

Re: cab corner 6x9 speaker brackets
 

bigblock73 i would like a set if you have some

Re: cab corner 6x9 speaker brackets
 

Bought a set from you but I didn't read the fine print as I have 3 point retractors directly in the way. Great quality product from what I can see and fast shipping. Eventually I will see if I can modify them for my application. Thanks Jeff

Re: cab corner 6x9 speaker brackets
 

Payment Sent.

Re: cab corner 6x9 speaker brackets
 

I'm interested in a set. Will they fit in a 64 Cab

Re: cab corner 6x9 speaker brackets
 

Question: How do I go about getting a screwdriver to the outside screw on these bad boys? I got a set in, installed them (I love them)... but I only used one interior side screw on the bottom, and the top screw. For the life of me, I can't see how I can get a screw bit at the right angle to put a hole for the outer mount. This is on an 86' C-10.

I got a pair of JL Audio C2 6x9's in, once I removed the rubber magnet cover from the speaker.

I love the clearance that these give you from the belts, and that they are solid as an bull ox. :metal:

Re: cab corner 6x9 speaker brackets
 

blind bug how do those JL's sound? Are you running an amp and what head unit are you running?

Re: cab corner 6x9 speaker brackets
 

They sound pretty solid considering I am running them off the head unit, which is a cheap JVC that came with the truck when I bought it. In another life I did car audio as a passion, even had sponsorships from MA Audio, and a handful of mom and pop install and custom fab locations. I’ve got a Zapco c2k 6.0x and an idmax 12 v.3 sitting in my garage collecting dust.

I say that to say this: the performance of speakers in these brackets is far and above better than the performance I got out of a sealed enclosure behind the seat. This is an infinite baffle setup, and while I lose bass, the overall loudness and clarity of the speakers is much better based on mounting location and no flex from the mount. Best case scenario would be to fab in some fiberglass enclosures behind these brackets to make it a sealed enclosure. But, if you are ok with that, you might as well create the full enclosure yourself. I thought about it, but ultimately didn’t think the work was worth it over these brackets.

I still need to add in some front stage speakers, and would like to add in a sub. JL Audio TW3 10” only takes like 3” of backspace to mount so a tight wedge behind the seat would mean I can take the seat all the way back and still have a little thump. Add in a JL Audio XD or HD under the seat in a 1000w x 5 setup and its going to be a killer setup. Ultimately the c10 isn’t much for Audio dynamics, though, so I will never be able to get to there level that I appreciate in other cars that have proper stage with proper insulation and a quiet engine.

Sorry about the rant... car Audio is apparently still my passion. lol

Re: cab corner 6x9 speaker brackets
 

I know this is a old post but are any still available.

Re: cab corner 6x9 speaker brackets
 

I recently got mine installed. For now I'm just running off the Pioneer deck with 4" speakers in the dash. It sounds really good. I'll add an amp and additional speakers in the future.

Regarding the brackets:
I covered the backside with sound deadener along with the back cab wall and floor. I also had some closed cell 1" thick foam laying around that I cut and fit in behind the speakers. This was key to good sound. Speakers and metal mix like oil and water. This is a good compromise for not having enclosed cabinets.
Hope this info is useful for someone.
All those wires were tucked in and dissapeared after I put the insulation pad and floor covering back in.

Re: cab corner 6x9 speaker brackets
 

Yes sir. www.73-87.com to order a set

Re: cab corner 6x9 speaker brackets
 

Thanks !! super nice. fast shipping!!

Re: cab corner 6x9 speaker brackets
 

I want to buy a set

Re: cab corner 6x9 speaker brackets
 

Awesome. Head over to www.73-87.com to see more info and order if you like. Let me know if you have any questions.

Re: cab corner 6x9 speaker brackets
 

I NEED a set!!!
Posted via Mobile Device

Re: cab corner 6x9 speaker brackets
 

PM sent

Re: cab corner 6x9 speaker brackets
 

I got my speaker brackets installed.
I still have the original cardboard tray and I couldn't get a screw into hold the bottom of the bracket. So I bent the bottom of the bracket down and out a bit, and hooked it on the backside of the sill.
Covered everything with speaker cloth. I stole the idea from another fella on here for using Velcro( hook and loop) to hold it up on the back wall.

Re: cab corner 6x9 speaker brackets
 

Looks great, nice work!