72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Just parted this out and decided I am not going to keep this. Looks pretty good from the kick panels up. Not interested in shipping right now, but could drop off between Northern MN and Northern TX in feb if you are close to my route. $650

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Screw holes look intact, radio hole looks unaltered.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

This is still sitting here...

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Interested in the windshield frame.. are you willing to cut and ship it?

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

I am interested what part of north texas.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

If you want to buy the whole part, I can cut and ship what you want.

That was actually LAST feb when I had this posted. Not sure if I am going that direction again or not this winter.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Interested. Please check on how much it would be to ship to 98281?

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

If the whole unit is still available I'd be willing to inspect on site and pick up.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Noted in line. Seeing if we can work out shipping with the person in front of you. If that falls through I will let you know.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Understood

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Are you still interested? What kind of schedule do you have?

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

I'd be interested in the windshield frame only as well (cut off in the middle of the window) if you're willing. I have a neighbor that's a snow bird that comes down my way every year in November. They live in Pine River, MN. Could probably get him to meet you to pick it up once cut off. Might want the dash pad and engine temp gauge also. Can't pay $650 though, thoughts?

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Problem is if I cut that off, the rest is pretty much scrap.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Ok, I understand. Just didn’t know if you were ready to get rid of some portion of it. Let me know if you change your mind. Thank you sir. Free bump, GLWS

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Still available.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Where do you find all this good stuff? too much? too much stuff? Harlow

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Pm sent

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

More pics...

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

And more. Let me know what else you may need pics of.. There is a little rust at the lower kick panels, but a pretty solid unit for 47 years old.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

UPDATE: May be able to haul this between Minnesota, eastern Nebraska or eastern Kansas between 2-2 to 2-4-19

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Hello, Highly intrested in the cowl assembly. Working on a resto for my 72 Blazer and looking for A-Pillar graph sections. Willing to travel out there if the price is a bit better. PM me if willing. Thx Mike

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

PM sent.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Attached the pictures that trying to get a better visual on. What I see so in your pictures looks great but looking to get a complete look at it before making a long drive. Appreciate your time. Heres the info that references Top, Middle and Bottom pictures.

Top: Interested in get a better view of the Left A pillar of what is under the weather strip from the top of window frame down as well face side of where the top hinge mounts down to where the rocker would have intersected

Middle: Interested in get a better view of the Left A pillar of what is under the weather strip from the top of window frame down as well face side of where the top hinge mounts down to where the rocker would have intersected.

Bottom: Interested in get a better view of the entire windshield exterior pinch weld under the windshield weather strip .

Thanks Mike

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

I tried a little bit today, but with all the snow then freezing rain and below 0 wind chills today, I will wait until it warms up a little. I did peel a little weather striping off and took a couple quick pics. Looks solid but there may be a little pitting where it curves.

Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame
 

Looks similar to mine in the upward curve behind the door weather strip. Most concerning area is the pinch weld behind the windshield weather strip on the vertical sections of the right and left A pillars. My driver side is so bad that there a pin hole spots on the pillars adjacent to the Windshield. Understand about the weather, thanks for the effort. Definiitly let know if you can get a view behind the weather strip all though you may not be able to in this cold weather or possiblly need to pop the windshield out.

Thanks Mike