The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   Need A Radiator (https://67-72chevytrucks.com/vboard/showthread.php?t=758606)

Rich84 03-06-2018 09:31 AM

Need A Radiator
 
I'm doing a budget build LQ4-4l80e swap in a '86 Custom Deluxe. This time I'm going with the factory shroud and mechanical fan. The truck needs a new radiator. Does anyone have any recommendations for a reasonably priced factory style radiator. I would think it should be at least a 2-core design. A $400 radiator is not an option.

I can't believe how rust free this truck is underneath. Very rare for a Northeast truck.

mongocanfly 03-06-2018 10:01 AM

Re: Need A Radiator
 
stock radiator works fine..I got a new one from O'Reilly. ..its a single core...I think the core is 1.25-1.5 but I can't remember...cost just over $100

Rich84 03-06-2018 02:20 PM

Re: Need A Radiator
 
Is that the one with plastic tanks?

mongocanfly 03-06-2018 08:37 PM

Re: Need A Radiator
 
it is plastic

Rich84 03-07-2018 09:50 AM

Re: Need A Radiator
 
Do you think can you use the unused heater hose outlet that is on the driverside below the top hose for the steam vent line? Maybe cap it with something that can be tapped for a fitting?

mongocanfly 03-07-2018 10:30 AM

Re: Need A Radiator
 
its actually on the passenger side below the cap....but should work...ive seen a few done that way....I drilled and tapped the water pump on mine..

Rich84 03-07-2018 11:11 AM

Re: Need A Radiator
 
Yes it is the passenger side..I can get it at Advanced Auto with a 25% off coupon, If there is any problems easy to return.

Another question..Where can I pull vacuum from to operate the heat/ac controls? I am using the port in the back of the intake for the brake booster.

ls1nova71 03-07-2018 11:21 AM

Re: Need A Radiator
 
On the passenger side of the intake, about in the middle is a fitting for vacuum controlled HVAC stuff. There is a small tab you just have to break off.

Rich84 03-07-2018 11:31 AM

Re: Need A Radiator
 
Thanks..


All times are GMT -4. The time now is 08:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com