Jans 53
 

Hello everyone
I would like to introduce my project to your fine forum.Its a 53 3100 on a S10 chassis with a GM performance zz4 350, 8.8 posi with 373 gears, TH350 trans with gear vendors overdrive unit and a 22 gal mustang tank.I will post some pics as soon as i can.

Re: Jans 53
 

:hi2:
You had posted this in the wrong section (Pre-47) so I moved it for ya.
:welcoem: to the forum!

Re: Jans 53
 

:hi2: and welcome to the forum, lots of great people to help you if needed and learn from you if needed. Sounds like a great build, ready for the pics:devil: we always like pics...Jim

Re: Jans 53
 

Anyone have any advice on how to download pics?

Re: Jans 53
 

Welcome http://67-72chevytrucks.com/vboard/f...b3_attachments

Re: Jans 53
 

though most of us use photobucket :D
and welcome to this awesome site

Re: Jans 53
 

also use the link at the bottom of Ogre's signature to put your build thread in your sig. and :welcome2:

Re: Jans 53
 

Thanks for the help!http://67-72chevytrucks.com/vboard/a...ictureid=20587

Re: Jans 53
 

Welcome, this site can always use another truck project....

Marc

Re: Jans 53
 

So this is what I started with in 2006. Up until this year my time to work on it has been limited. In the meantime I was purchasing the parts I would need.

Re: Jans 53
 

The mock up. I opted to shorten the front of the bed by 4 inches so of course i had to shorten the frame.

Re: Jans 53
 

Did a mini tub on the bed.

Re: Jans 53
 

CPP brake booster

Re: Jans 53
 

Found this new ididit column on craigslist with the 65 impala wheel for $100.00 !!!!! Score !!!

Re: Jans 53
 

GM Performance ZZ4, TH350, Gear Vendors overdrive.

Re: Jans 53
 

Cleaned and painted frame.

Re: Jans 53
 

Chassis assembled thats 8.8 rear end with 3.73 posi that gives me 4 wheel disc and check out the control arms you get those if you find a eddie bauer exploder. Tank is a 69 22 gal mustang with a aeroquip fuel pump kit.

Re: Jans 53
 

Great looking project!

Re: Jans 53
 

Looks really nice, you are doing some great work...Jim

Re: Jans 53
 

Looking great.

Re: Jans 53
 

Hi Jan and welcome.

If you're over in Garage Journal you'll know I mean this in the nicest possible way - YOU SUCK!!!

Man, $100 for an ididit column? Craap, I thought I did good getting one for $350.

I like your project, did you paint the frame with catalyzed automotive paint, rattle cans or maybe brush on enamel like Rustoleum? It looks like a very nice job and I'm always surprised how good the various methods look.

Also, what are your mini tubs from? They're very nice.

Re: Jans 53
 

http://67-72chevytrucks.com/vboard/a...1&d=1418104383

I miss horn rings.

Re: Jans 53
 

Thanks everyone, this project has been a lot of fun for me. I enjoy looking at all your projects, some beautiful trucks being built.;)

Dan, $350. is a heck of a good price! I couldnt get there with my money fast enough then when I got there he threw in the steering wheel. SWEET!!!
The paint is summits catalyzed chassis paint in satin, as you know we cant get it shipped to cali, fortunately, Im only a couple hr's from the sparks NV werehouse.
The tubs are from Tractor Supply cost $30. each and look to be about a 16g. (You will find them in the trailer section)

Re: Jans 53
 

So here's more part's that I have accumulated. American Autowire ,NVU Gauges and aeromotive fuel system.
A note on the NVU gauges -Since I was using the mustang sender they calibrated the gauge so that it would read correctly...no charge.:metal:

I need to have a driveline made, anyone have any recommendations? Empire? Denny's?

Re: Jans 53
 

Empire and denny's are both top notch builders and there prices are very close, It's all in the shipping. I went with www.dynotecheng.com shaft all great stuff.