The 1947 - Present Chevrolet & GMC Truck Message Board Network - In the beginning it was a original truck

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=38)

- - In the beginning it was a original truck (https://67-72chevytrucks.com/vboard/showthread.php?t=736305)

In the beginning it was a original truck

Need some feedback during my restoration
on my 67 truck.
Transmission bolt on.
Cardan bolt on
Floor finishes
Posted via Mobile Device

Re: In the beginning it was a original truck

It all looks good! Is it a 3/4 ton or did you change the drive shafts. Mine don't look the same as yours.

Re: In the beginning it was a original truck

Quote:

Originally Posted by HO455 (Post 7924740)

It all looks good! Is it a 3/4 ton or did you change the drive shafts. Mine don't look the same as yours.

It's a C10 longbed and I have to rebuild the drive shaft with new slip yoke
for automatic ( it was a manuel truck before), new companion flanges and universal joint.
The funny is that, when I left it at the workshop, they called me on the phone and said that the drive shaft that I have, was wrongly installed. Like if you look at the picture and mount the front shaft back and the back shaft in front.
That's why I had to rebuild it.