The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Paint & Bodywork (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=16)
-   -   fixing a flat spot (https://67-72chevytrucks.com/vboard/showthread.php?t=736797)

MF Doom 04-30-2017 09:17 PM

fixing a flat spot
 
no clue how to fix this flat section back to the original shape. Cant find any helpful info on this particular problem. The circled part is flat and the other pic is the original shape
http://i.imgur.com/14d81lpl.jpg
http://i.imgur.com/qKxifBhl.jpg

PDW HOTRODS 05-04-2017 01:37 PM

Re: fixing a flat spot
 
Try hammer from back with dolly on the other side, or try a stud gun and slide hammer. Stud gun is best if you can't get a clear shot at the back. If you don't have one you might be able to rent one.


All times are GMT -4. The time now is 03:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com