The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   VA 64-66 clusters (https://67-72chevytrucks.com/vboard/showthread.php?t=684113)

PGSigns 10-02-2015 02:17 PM

64-66 clusters
 
4 Attachment(s)
I have two complete clusters that I have pulled apart detailed and what I call preserved. These were in really good shape and I wanted to preserve them as they were made and not glass bead any of the parts. After a very good cleaning I clear coated all the tins. I cleaned all the faces of the gauges and cleaned the workings with air. Tested the gauges with a voltmeter to ensure no open circuits. Painted the inside, the face and the bezel. Cleaned all the plastic parts for the indicators. Polished the original front faces. All the needles have been repainted. I cleaned the speedometer gears and reset the odometer to zero and ran the speedo for a mile to test its function and verify the odometer worked as it should. I can set these to any mileage needed. $175 each plus shipping.
Jimmy
process pics

PGSigns 10-02-2015 02:19 PM

Re: 64-66 clusters
 
3 Attachment(s)
Dash 1

PGSigns 10-02-2015 02:21 PM

Re: 64-66 clusters
 
3 Attachment(s)
Dash 2 has a date stamp of March 10 1966. I have bezels in black also.

aotte1 10-02-2015 02:49 PM

Re: 64-66 clusters
 
Jimmy,

Interested in one of them, any differences you can point out? Is it easy to add a factory tach? Bezels that are black/gray, what condition?

thanks
Les

aotte1 10-02-2015 03:02 PM

Re: 64-66 clusters
 
Jimmy,

PM sent, and hope storm is not damaging for you!

Les

PGSigns 10-05-2015 07:53 PM

Re: 64-66 clusters
 
Storms over here so time for a sale. Lowered prices.
Jimmy

PGSigns 10-09-2015 07:58 PM

Re: 64-66 clusters
 
2 Attachment(s)
This is done with the black bezel and the new decals I am doing for the side fillers. Done in the same manner as the other two with all original parts.
Jimmy

PGSigns 10-19-2015 08:42 AM

Re: 64-66 clusters
 
Lets bump these up.
Jimmy

Pappyx3! 10-19-2015 09:04 AM

Re: 64-66 clusters
 
Hey Jimmy,

Do you have a dash with the silver bezel, with the C10/Chevrolet decals assembled?

Any mods you suggest for lighting? How much to ship 22655?

Thanks,

Pappyx4!

PGSigns 10-19-2015 12:41 PM

Re: 64-66 clusters
 
I can swap the bezel from silver to black on any of these. I would say shipping would not be over $15 to get it to you. As for lighting I just use what came in them stock in my truck. Several folks have gone to the LED replacements with good results.
Jimmy

PGSigns 10-29-2015 06:31 PM

Re: 64-66 clusters
 
1 Attachment(s)
Pappy I made the changes you needed and here is the completed cluster.
Jimmy

Pappyx3! 10-29-2015 06:42 PM

Re: 64-66 clusters
 
Beautiful! Cant wait to get it put in!

Thanks Jimmy!


Quote:

Originally Posted by PGSigns (Post 7358205)
Pappy I made the changes you needed and here is the completed cluster.
Jimmy


PGSigns 12-07-2015 08:58 PM

Re: 64-66 clusters
 
Time to bring this back up. I have 2 ready to go with black or silver bezels. Getting a couple more ready just in time for Christmas. Doing a lights only cluster in this batch.
Jimmy

veltex 12-07-2015 11:06 PM

Re: 64-66 clusters
 
Happen to have a restored GMC cluster?

PGSigns 12-08-2015 07:57 AM

Re: 64-66 clusters
 
Not right now. The GMC stuff is scarce around here and I have not been able to put my hands on any.
Jimmy

oldarky66 12-08-2015 08:38 PM

Re: 64-66 clusters
 
Very nice work. Would you consider refurbishing one for someone if they sent it to you, and if so a rough estimate on cost?

Thanks,
Wade

PGSigns 12-08-2015 08:46 PM

Re: 64-66 clusters
 
I have no problem doing one. Cost would depend on condition. Hard to tell with out seeing it. Will also take clusters in as a core.
Jimmy

oldarky66 12-08-2015 09:46 PM

Re: 64-66 clusters
 
Quote:

Originally Posted by PGSigns (Post 7403370)
I have no problem doing one. Cost would depend on condition. Hard to tell with out seeing it. Will also take clusters in as a core.
Jimmy

Thanks for quick reply Jimmy. PM me your address and I'll send you one to check out. Might be a few days though. Gotta list some stuff on here to raise some extra $$. This Christmas shopping thing knocking a serious dent in my wallet.

Wade

PGSigns 01-01-2016 08:15 PM

Re: 64-66 clusters
 
I have two built and two more ready to put together. So lets bump this up.
Jimmy

northern 85 05-03-2016 08:16 PM

Re: 64-66 clusters
 
Looking for a cluster to add a tach that i have, do you have any pics of the clusters you have ready?

PGSigns 05-04-2016 06:45 AM

Re: 64-66 clusters
 
I have the cluster above with the silver bezel ready to go. I can switch it with a black one if needed. I can also build you one if you want as I have parts ready for several more.
Jimmy

chevy2tom 05-05-2016 10:42 AM

Re: 64-66 clusters
 
Quote:

Originally Posted by PGSigns (Post 7358205)
Pappy I made the changes you needed and here is the completed cluster.
Jimmy

Jimmy, how much for one like this (decals, gauges & silver bezel) shipped to 60015 Illinois?

The Rocknrod 05-05-2016 11:58 AM

Re: 64-66 clusters
 
Can you update the Oil Gauge to a sender unit type?
and Ammeter to a volt meter?

PGSigns 05-06-2016 08:41 PM

Re: 64-66 clusters
 
Tom Ill get one like you want assembled and post pictures. Will look up the shipping cost and PM you. Rod All the stuff I have is factory stuff. I have not been able to find anyone making replacement gauges to update like you want.
Jimmy

northern 85 05-07-2016 06:56 AM

Re: 64-66 clusters
 
Can i get a quote on a dash shipped to 04937 silver or black? The one that was stamped march 66 is prob gone? Going to grab some stickers too:chevy:


All times are GMT -4. The time now is 04:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com