The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=212)
-   -   Ideas for seating - need suggestions (https://67-72chevytrucks.com/vboard/showthread.php?t=628511)

66mustangguy 05-12-2014 01:11 PM

Ideas for seating - need suggestions
 
i have a 71 GMC suburban. As I restore the thing I am looking to the interior and with 3 young kids I want to keep it safe (shoulder belts and headrests). the seats are trashed in it and its missing 3rd row.

I am on the fence on the direction to go. original with added shoulder belts? can you add headrests or should I go with something like 99 suburban?

how did people who converted add shoulder belts?

WH0DAMAN 05-13-2014 03:10 PM

Re: Ideas for seating - need suggestions
 
You can add shoulder belts to the 2nd row drivers side seat & 3rd row driver & passenger seats. Shoulder belt add on is not possible on the passenger side 2nd row due to the seat being narrower for pass through to the 3rd row seat (if that's the configuration you have). Headrests are not addable. If you want shoulder belts and headrests for all seat positions then you will have to upgrade to a more modern suburban seat configuration with the belts built in. Are you in Hillsboro OR? If so, you can stop by my shop anytime & I can show you what options you have. I'm about an hour from you.

66mustangguy 05-14-2014 10:57 AM

Re: Ideas for seating - need suggestions
 
Very Nice suburban!. yeah Hillsboro Oregon. I will send you a PM in a bit.

kev2809 05-15-2014 09:52 PM

Re: Ideas for seating - need suggestions
 
2000+ suburban/tahoe seats is what i went with (2003 suburban to be exact). they come with the belts built in the seat and attach to the side of the seat...so no worrying about mounting the belts to the floor. just drill and bolt the seats down. the middle requires some notching of the raised floor area and using spacers, but still the same concept

Cumminpwr11 07-05-2014 06:39 AM

Re: Ideas for seating - need suggestions
 
Kevin,

did you mount the third row seat to the wood? Do you feel that's safe enough?

Chris

kev2809 07-05-2014 02:21 PM

Re: Ideas for seating - need suggestions
 
sorry, i forgot to mention i only went with with the first 2 rows, i dont have room for the third row because of my frame notch.

to be honest, i personally would try to find a way to make it more secure than bolting it to the wood floor. but...that is all the the factory did with the third row seat...


All times are GMT -4. The time now is 12:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com