i'm selling lower 64-66 door patches
i'm about to start cutting up my spare doors to fix my doors and if anybody has speaker holes in the lower part of there doors and wants a patch for it i'll cut it out for you!! as far as price goes it would be $5 each plus whatever it cost for shipping!! i'll be cutting the outside of the doors out this weekend let me know, thanks!!
|
Re: i'm selling lower 64-66 door patches
Quote:
Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
are there any cowl dents in the doors?
|
Re: i'm selling lower 64-66 door patches
crap I can't edit my last. I basically need a patch to repair the damage from the door hitting the cowl. I can use metal further back on the door if you're going to not be using that section.
|
Re: i'm selling lower 64-66 door patches
I guess I'm still a little confused of what patches you will have available. I'm interested in any of the lower portion(s), inner or outer, you won't be using
Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
ok, if you guys can post pics of the areas that you need! that would help for when i get ready to cut them up! the doors i have aren't all that great, thats why i'm cutting them up! the lower parts of the doors, i'm cutting out is were most people cut to put speakers in there doors! i'll post pics tomorrow mourning of the part i'm talking about, thanks!!
|
Re: i'm selling lower 64-66 door patches
Quote:
|
Re: i'm selling lower 64-66 door patches
Quote:
|
Re: i'm selling lower 64-66 door patches
Will get you some pics as soon as I get home
Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
5 Attachment(s)
ok got some pictures today outside bottom are no good on both doors rusted with bondo, inside bottoms are no good either got of pin holes! the black flat piece is what i was talking about cutting out, the ouside edge is fine k1rodeoboater! just need to know how big a piece you need and if you need 1 or 2 pieces!
|
Re: i'm selling lower 64-66 door patches
4 Attachment(s)
heres the pictures of the outside bottom and the inside side, last picture is a close up of the thrid picture to show some of the pin holes, the very bottom has atleast 10-15 pin holes just like the side does
|
Re: i'm selling lower 64-66 door patches
I still need to pull off the tin someone riveted over the speaker hole to verify what size, but this is the area. Don't cut anything until I'm sure.
Thanks, Robert http://i1106.photobucket.com/albums/...IMAG0857-1.jpg |
Re: i'm selling lower 64-66 door patches
Quote:
|
Re: i'm selling lower 64-66 door patches
i'll be cutting them saturday just to let you guys know
|
Re: i'm selling lower 64-66 door patches
Quote:
I'll check for sure tomorrow. Thanks again. Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
i have an idea of a way to ship them! do you need all four corners??
|
Re: i'm selling lower 64-66 door patches
k1rodeo, how many pieces do you need? and how big?? i'll be cuttin these doors up tomorrow to fix a few spots in my doors and one spot in my hood!!
|
Re: i'm selling lower 64-66 door patches
I'll need two pieces to fix this damage on both my passenger and driver doors. dimensionally from the lower body line a piece that is 8" long all the way up to the window would be perfect. It can be from any part of the door really
http://i160.photobucket.com/albums/t...1/64ddd82d.jpg |
Re: i'm selling lower 64-66 door patches
I took some pics, and I can easily get by with just pieces cut to 8x11.
How do these pics look? http://i1106.photobucket.com/albums/...5/IMAG0871.jpg http://i1106.photobucket.com/albums/...5/IMAG0870.jpg http://i1106.photobucket.com/albums/...5/IMAG0872.jpg Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
that will work, i'll cut them a lil big and let you trim them down! do you only need two pieces or all four corners!!
|
Re: i'm selling lower 64-66 door patches
I have 4 doors to do. My 66 truck has speaker holes, and my 65 has speaker holes.
4 similar pieces total. Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
I edited your photo.
8x11 along the red lines I drew should work. http://i1106.photobucket.com/albums/...gerdoor011.png Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
robert, i'll get all 4 of those cut out for you, i got a few sheets of cardboard and can make an envelope for them! all them being the same they will just be stacked on top of each other!
k1rodeo, i'll get you your pieces cut out today as while! i'll need you both to send me a pm with your mailing address, and i'll get you both shipping quotes monday, and then we can make payment arrangements |
Re: i'm selling lower 64-66 door patches
PM sent
|
Re: i'm selling lower 64-66 door patches
pm sent
|
Re: i'm selling lower 64-66 door patches
ok, i got your guys patches cut out, and about ready! robert, theres two of the patches that have 2-4 holes in them now! had to use a drill bit to get shot welds! i will post pictures of the pieces a lil later! k1rodeo, i just got to get a small box for your stuff and it will be ready!
|
Re: i'm selling lower 64-66 door patches
2 Attachment(s)
ok lostmy65 and k1rodeo, sorry about the delay! you ever hear it happens in 3's?! first my hot water heater goes out, then my phone(so i couldn't take pictures), then my computer crashes and i had to get a new power supply!! anyways got that all fixed, had to borrow the wifes camera and got some pictures for you two!! robert theres two panels like the one on the left and two like the right, there was a brace behind that panel when i cut the two off the front part of the doors and had to drill out the spot welds! k1rodeo i got you panels cut out and just needed to find a box but now i got one! tomorrow mourning when i get off work since i work third shift i will get you guys your shipping quotes! heres the pictures let me know if they will work for you guys!! i'll get you guys your quotes and once i get payment the will be send the same day, thanks!!
|
Re: i'm selling lower 64-66 door patches
They look good.
Do you have an idea what shipping Will be? Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
i'll go here in a lil bit and let you know this after noon, and will pm you my paypal info. if that will work for you!!
|
Re: i'm selling lower 64-66 door patches
Dude you rock. And no worries I was busy this last week studying for a promotion board. So I was a wee bit busy and preoccupied.
Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
ok robert shipping is 13.23 for a total of 33.23, mike shipping for you is 13.60 for a total of 23.60! if you make the payment this weekend i'll send them out monday and send you a tracking number! i'll be going to the inlaws this weekend and i'm leaving about 9-10am. friday mourning!
mike, i sent you an invoice to your email address! |
Re: i'm selling lower 64-66 door patches
Hey chad I brain farted this weekend. I am at work eight now but will send payment when I get home
Posted via Mobile Device |
Re: i'm selling lower 64-66 door patches
no problem, i got them boxed an ready to go when you are, lol!!
|
Re: i'm selling lower 64-66 door patches
Sent!!!
|
Re: i'm selling lower 64-66 door patches
Oops!
I'm sorry, I forgot to tell you I got the inner/lower door panels early last week. They look great! Thanks |
All times are GMT -4. The time now is 04:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com