Wiring
Anyone know of an adapter/coupler for the dash board wiring harness? I'm thinking about a custom dash but don't want to cut the wiring harness to hook up the new gauges, or make a whole new harness if I don't have to.
|
Re: Wiring
Don't know of a custom wiring harness, what type of guages are you thinking of running?
|
Re: Wiring
I don't know of one either. I went to Radio Shack and made my own harness plug because my printed circuit was kind of trash.
|
Re: Wiring
Just found one from Dakota Digital. The pic was pretty small and hard to see , but the description was exactly what I'm looking for. $39.99 plus $10 for shipping.
|
Re: Wiring
I bought a set of combo's from Dolphin with the 3 hole bezel...
|
Re: Wiring
Nice, pics???
|
Re: Wiring
will have pics tomorrow
|
Re: Wiring
Great can't wait to see the pic
|
Re: Wiring
3 Attachment(s)
Sorry this took so long, was off line for a couple of days...The gauges are from Dolfin, I seem to have a problem seeing the bottom gauges on the stock bezel (steering wheel) so I went with the combo's. The two big ones are in from the front, the tach is secured from the back, kinda gives it a 3d look. Had to make brackets to do it. I'll do the other two from the back also when I get time...
|
All times are GMT -4. The time now is 01:20 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com