For Sale
 

I am new here, have some parts that I would like to sale or trade. I will get some pictures of the goods with my brothers digital camera over the weekend.

Ford 9 inch Spooled 4:11 Center Section...28 Spline
Ford 9 inch Housing...will get dimensions if needed $350 for both(perfect condition)

BB 402/396 Heads...ported and polished...will get casting number if needed..large valves and oval ports(large ones) $200

Crane Valve Springs: About 1 Hour of run time on them...good to 550 lift. Put a bigger cam in and needed new springs..perfect..$75

Comp Cam Stamped Rollet Tip Rocker Arms...1.72 ratio...great shape..$50

BB Chevy Double Roller Timing Chain. Perfect $15

Carter 650 CFM Electric Choke Carb..perfect $50

Stock Iron BB 396/402 Intake Manifold....$25

Lunati Cam...BB Chevy...about 1 hour of time on it, was not big enough...can get specs....$50

BB Chevy Chrome Valve Covers...good shape...$20

Nice rear bumber off of my 84...it is more of something that would be put on a farm truck or something for off roading...I will get a picture of it....$30

BBC Chrome Pulley set...alternator,water pump(long), crank....$40 for all

Brand New AC system...like the ones by Vintage Air, never been ran or installed, still in box...take $650.

Thats all I can think of off hand...may add more when I see what I forgot. Let me know, if you are interested in anything here.

Thanks,

Rusty

I need the pulleys-> Air_Male@webtv.net shoot me your address an I'll send you a check!

I'm interested in those heads. post the numbers. What shape are they in? Ready to run? Thanks

I will get the casting numbers tonight, I had them on for about two days and decided I wanted to go a different way with the motor. They had a valve job before I put them on, but I had a drag racing crew that I know take a look at them and they said the valves were pretty bad, so I suspect some new valves will be needed. All in al they are in good shape, ran fine on the motor...no smoke or leaking seals.

Where is Willis at? If close enough I may interested in the bumper.

I actually am moving to Willis next month. I live between Rockwall and Greenville...northeast of the Metroplex. It is in great shape...good strong bumper. Let me know. I will get some pics for you this weekend, or you can come take a look at it. I could bring it to work tomorrow, in Richardson, if you work near by.

I am interested in the A/C. What year would it be compatible with? I have looked around and that is a good price.

It will fit any vehicle. It is just like the ones you get from Vintage Air. The unit sits under the dash and really gets cold. This is one of the bigger units offered.

I'd like the carb! I'll PM you with some info.

Thanks,
Scott

Here is the info for the Heads. This is all www.mortec.com had to say about them.
6272292....70-78...oval...OPEN...402, 454

Is carb sold ?

Sorry, the carb is already taken.