Need Template to cut A/C Holes in Dash
 

Where can I find a template to cut all 3 holes in my dash for the original air conditioning vents? Thanks.

Re: Need Template to cut A/C Holes in Dash
 

I can send you the PDF template for the corner ones I received from Rcrahn. PM me your email.

More info here:
http://67-72chevytrucks.com/vboard/s...d.php?t=582197

Re: Need Template to cut A/C Holes in Dash
 

Ok thanks. PM inbound.

Re: Need Template to cut A/C Holes in Dash
 

Template sent...enjoy!

Re: Need Template to cut A/C Holes in Dash
 

Thanks I printed them off and am planning on cutting them out this week. Do you have the center vent template by chance or is it just a rectangle?

Re: Need Template to cut A/C Holes in Dash
 

There's one on here, page 17:

http://vintageair.com/DownloadsSecti...ols)%20Ine.pdf

Re: Need Template to cut A/C Holes in Dash
 

9teen69 - I also need a copy of the template. My cab is going to paint later this week. Can I PM you my email address? Thanks in advance.

Mark

Re: Need Template to cut A/C Holes in Dash
 

Email sent TRKFRK!

Re: Need Template to cut A/C Holes in Dash
 

67ChevyRedneck install thread is the best I've seen...
http://www.67-72chevytrucks.com/vboa...d.php?t=249479

Re: Need Template to cut A/C Holes in Dash
 

Thanks for the input guys!!

Re: Need Template to cut A/C Holes in Dash
 

Template worked perfect! Thanks

Re: Need Template to cut A/C Holes in Dash
 

Pic 2

Re: Need Template to cut A/C Holes in Dash
 

Niice...What did you use to cut it?

Re: Need Template to cut A/C Holes in Dash
 

A small hand held jig saw. Worked perfect. I first cut it undersized then used a flapper wheel to ease out the hole.

Re: Need Template to cut A/C Holes in Dash
 

Pic 2

Re: Need Template to cut A/C Holes in Dash
 

Sorry to jump on board. But can you email it to me as well. I PM'd my email address to you.

THANKS!

Re: Need Template to cut A/C Holes in Dash
 

Cool, thanks for the advice.

Re: Need Template to cut A/C Holes in Dash
 

Mike88a - template sent.

Re: Need Template to cut A/C Holes in Dash
 

I am getting ready to install factory style vents in my truck. Does anyone have a copy of the email template that went around in this thread? If you do, and can email it to me, please pm me and I will send you my email.

Thanks!

John

PS, I've got the center vent done, just need the sides.

Re: Need Template to cut A/C Holes in Dash
 

Just sent you a PM. Good luck and post pics.

Re: Need Template to cut A/C Holes in Dash
 

Got it, thanks TRKFRK!

Re: Need Template to cut A/C Holes in Dash
 

I hope you're not getting tired of people asking for the side a/c templates. I've been searching the web & so far this is the only site that has them. Could I possibly get a copy also?

Re: Need Template to cut A/C Holes in Dash
 

Here you go. This is what trkfrk sent to me.

Re: Need Template to cut A/C Holes in Dash
 

Hi, I also have been looking for the template so I can download it but I can't find it. If is not a lot of trouble can you share the template with me thank you in advance.

Re: Need Template to cut A/C Holes in Dash
 

It is right above your post noskiki6