The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   Another speedometer question (http://67-72chevytrucks.com/vboard/showthread.php?t=799351)

nsb29 01-09-2020 08:53 PM

Another speedometer question
 
I have a 6.0 and a 6l80e from a2009 Pontiac G8, can anyone tell me where I git my signal from for a speedometer. I know pin 57 is used but on this ECM thereís no pin 57. Thanks

Wildkarde 01-10-2020 12:20 AM

Re: Another speedometer question
 
A lot of vehicles don't use that wire so you'll have to add one. If you dont have the correct crimpers you can just use a piece of one of the ones you pulled out.

Also make sure your tuner sets up the speedo output correctly.

nsb29 01-10-2020 08:16 AM

Re: Another speedometer question
 
I already sent my ECM out and had vats removed and other stuff dun so I guess Iíll have to send it out for that I was hoping I didnít have to thanks


All times are GMT -4. The time now is 11:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com