The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - NP205 10 Spline Input Diameter (https://67-72chevytrucks.com/vboard/showthread.php?t=724316)

1972RedNeck

12-07-2016 11:04 PM

NP205 10 Spline Input Diameter

Does anybody have a 10 spline input for a 205 laying around that they could measure for me? All I have easy access to is the slopped out coupler out of my '72 that measures about 1 3/16" on the inside. Surely the input shafts are 1 1/8" but could someone measure for me?

kwmech

12-08-2016 10:24 PM

Re: NP205 10 Spline Input Diameter

I've got 1.350 average. You sure it's not 1-3/8?

1972RedNeck

12-09-2016 10:16 AM

Re: NP205 10 Spline Input Diameter

Turns out it is 1 3/8". Ya know how when ya measure a splined shaft you measure across the high points? Well this idjit measured the coupler the same way...

All times are GMT -4. The time now is 06:45 PM.