The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   1972 Blazer Rear Disc Brakes (https://67-72chevytrucks.com/vboard/showthread.php?t=754811)

twp1 01-14-2018 05:12 PM

1972 Blazer Rear Disc Brakes
 
Has anyone removed the rear drum brakes and installed disc brakes? What kit did you use and any other info will help! Would like to install disc on the back of mine.

hemi43 01-14-2018 05:34 PM

Re: 1972 Blazer Rear Disc Brakes
 
Quote:

Originally Posted by twp1 (Post 8160673)
Has anyone removed the rear drum brakes and installed disc brakes? What kit did you use and any other info will help! Would like to install disc on the back of mine.

Why?

A1971Blazer 01-14-2018 05:39 PM

Re: 1972 Blazer Rear Disc Brakes
 
There may be a few more but....here's a few considerations:
Unless you're going with bigger tires and more mods...spend the money on something else....the front disc brakes do 80% of the stopping......stock or near stock...drums are fine...but:

If you use the stock axle with a kit, You will have to address e-brake if you want one...... if you swap in a later model with the disc and e-brake already on it....it may not clear the factory wheels...

twp1 01-14-2018 05:39 PM

Re: 1972 Blazer Rear Disc Brakes
 
Why not?

twp1 01-14-2018 05:40 PM

Re: 1972 Blazer Rear Disc Brakes
 
thanks for the info.

twp1 01-14-2018 05:48 PM

Re: 1972 Blazer Rear Disc Brakes
 
LMC has a kit that will fit 15" wheels and has the e-brake cables! Has anyone used it?

Tom Vogel 01-14-2018 09:10 PM

Re: 1972 Blazer Rear Disc Brakes
 
I used a kit from Wilwood, and they clear my 10x15” torque Thrusts, and they come with an emergency brake.

hemi43 01-14-2018 09:28 PM

Re: 1972 Blazer Rear Disc Brakes
 
Quote:

Originally Posted by twp1 (Post 8160689)
Why not?

Rear drum brakes are more than sufficient, and will give you less problems than rear disc. The biggest issue with rear disc is the parking brake.
The only advantage I could see is that it might look better if you have aftermarket rims.

scf100 01-17-2018 10:11 PM

Re: 1972 Blazer Rear Disc Brakes
 
Quote:

Originally Posted by hemi43 (Post 8160886)
Rear drum brakes are more than sufficient, and will give you less problems than rear disc. The biggest issue with rear disc is the parking brake.
The only advantage I could see is that it might look better if you have aftermarket rims.


I have aftermarket rims so I’m interested in this thread........

twp1 01-17-2018 10:26 PM

Re: 1972 Blazer Rear Disc Brakes
 
GMC-YA68 installed rear disc and i would like him to post some pic's! And if anyone else has installed rear disc please let us know what kind and the pic's of process!!

twp1 01-17-2018 10:27 PM

Re: 1972 Blazer Rear Disc Brakes
 
Tom,

can you post some pic's of yours being installed or installed?

MikeCofield 01-17-2018 11:32 PM

Re: 1972 Blazer Rear Disc Brakes
 
Captain fab makes a nice set up

GMC-YA68 01-18-2018 01:13 AM

Re: 1972 Blazer Rear Disc Brakes
 
Quote:

Originally Posted by twp1 (Post 8163790)
GMC-YA68 installed rear disc and i would like him to post some pic's! And if anyone else has installed rear disc please let us know what kind and the pic's of process!!

Quote:

Originally Posted by MikeCofield (Post 8163861)
Captain fab makes a nice set up

I will pull a wheel off on mine this weekend. They worked out perfectly. I used an adjustable brake proportioning valve from Hydratech and Captain Fabs brackets, along with the Toronado calipers and it's been working flawlessly. Capt sends all the info on which rotors (i forget what I used, but he can chime in, or I will go find me receipt) and calipers to use in his invoice or email. Easy Peasy....

elkniks 01-18-2018 09:24 PM

Re: 1972 Blazer Rear Disc Brakes
 
I used CPP Big Brake Kit and they work great (even with 11 inches of vacuum)! The kit comes very complete with parking brake cables and hoses. I would buy again. The only problem I found was the fit of their rotors on the axles, I had to make 0.015" shims to center rotor on axle. I also have a set of Captain Fab brackets unused if anyone is interested.

stangtjk 01-19-2018 12:51 AM

Re: 1972 Blazer Rear Disc Brakes
 
2 Attachment(s)
At some point in my blazer's life someone swapped in an old 14 bolt. I was redoing the whole brake system and decided I wanted rear discs but also wanted to have the drum in hat parking brake... So i replaced the axle flanges for the drum brakes with ones I had machined to mount late model discs on. I used the brackets, calipers and rotors from a lated model dually. Had to turn down the hubs to get the rotors to slide on. Probably would have been easier just to swap axles.

mcmlxix 01-19-2018 04:27 AM

Re: 1972 Blazer Rear Disc Brakes
 
2 Attachment(s)
Grab a late model Tahoe/Yukon/Sierra/Silverado 6 lug disc brake rear off craigslist. Remove all brackets and weld on some DIY4X spring perches. Parts available at any auto parts store... price range $250-$450

Hard Parker 01-19-2018 12:55 PM

Re: 1972 Blazer Rear Disc Brakes
 
If you want to part it together yourself you can use the rear calipers off a 77 Eldorado, they have a built in parking brake.

mcmlxix 01-19-2018 07:46 PM

Re: 1972 Blazer Rear Disc Brakes
 
2 Attachment(s)
Quote:

Originally Posted by Hard Parker (Post 8165004)
If you want to part it together yourself you can use the rear calipers off a 77 Eldorado, they have a built in parking brake.

the Eldorado calipers are small and only use a lever to apply pressure. the Tahoe calipers are twin piston and use a drum in hat emergency brake... that would be my preference.

simicrintz 01-19-2018 11:04 PM

Re: 1972 Blazer Rear Disc Brakes
 
Do not back up with the parking brake on if you do the drum in hat axle (don't ask me how I know!).

Hard Parker 01-30-2018 12:48 PM

Re: 1972 Blazer Rear Disc Brakes
 
Quote:

Originally Posted by mcmlxix (Post 8165285)
the Eldorado calipers are small and only use a lever to apply pressure. the Tahoe calipers are twin piston and use a drum in hat emergency brake... that would be my preference.

What master cylinder and booster are you running with that set up?

mcmlxix 02-01-2018 03:14 AM

Re: 1972 Blazer Rear Disc Brakes
 
Quote:

Originally Posted by Hard Parker (Post 8173976)
What master cylinder and booster are you running with that set up?

So I have a unique setup. I have large twin piston calipers front and rear. I also upgraded to hydro-boost from the 2005 GMC 2500 that my rear axle came out of... I used a wildwood adjustable proportioning valve to be able to adjust as needed...

There is a lot of good information to read over here....

http://www.pirate4x4.com/tech/billavista/Brakes/

chevyguy_72 02-01-2018 02:27 PM

Re: 1972 Blazer Rear Disc Brakes
 
I havent pulled the trigger on these yet but this is the option i was thinking
www.littleshopmfg.com

I talked to him and he said he can def get a setup that will work...

twp1 02-03-2018 08:38 PM

Re: 1972 Blazer Rear Disc Brakes
 
That kit looks like it would be worth trying!!!!!

grillzy 02-04-2018 04:38 PM

Re: 1972 Blazer Rear Disc Brakes
 
https://www.littleshopmfg.com/gm-62-...-brakes-6-lug/

direct link. Price is right

twp1 02-12-2018 09:00 AM

Re: 1972 Blazer Rear Disc Brakes
 
3 Attachment(s)
So I bought the Little Shop disc brake set up and the install went smooth and quick! Once I get the blazer back together I will let you know how they work!!


All times are GMT -4. The time now is 01:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com