The Old Mule - 64 BBW
5 Attachment(s)
Figured I would start a build thread to keep a run of what I am doing with my new ride. Nothing major, but had to fix a couple things to make it mine.
First and foremost, gotta have my foot gas pedal. (yeah I know, but I lived and survived the 70's...at least it isn't on a Gremlin:lol: ) Next was my front tag. I have forgotten how long I have been using it, but as the guys at work state, we know it is yours if it has the plate. Lastly was having a place for the coffee and water bottles. I picked up a cup-holder for a 2002 Silverado Work Truck (GM Part#88938355). They are still a bit pricey ($65), but I had mine so I took it out of the 83 and removed the shelf angle that I added to mount it in the 83. The 66 bench seat is flat still across the front lower lip. Originally I though I would have to pull the seat, drill, then bolt it on, but I found a simpler way. Got two (2) old Harbor Freight 1" c-clamps, flipped them with the screw end up into the seat and clamped the original cup holder brackets to the seat lip. Again, I was doing this mainly to see if it would clear and I could mark for holes, but the cup holder is solid and isn't going anywhere. If you can find one in a junkyard these holders work great for all size containers. Well back to driving it. |
Re: Palf's 64 BBW Short Fleet
Nice truck! I'm subscribed! :chevy:
|
Re: Palf's 64 BBW Short Fleet
Very nice ride
Subscribed |
Re: Palf's 64 BBW Short Fleet
I like your cupholder idea. I'm going to put that one in my "borrowed from other build threads" file so I can use it on my builds.
Oh yes, Nice ride too! |
Re: Palf's 64 BBW Short Fleet
Killer man, I like it.
|
Re: Palf's 64 BBW Short Fleet
Very nice!
|
Re: Palf's 64 BBW Short Fleet
Great Start! :metal:
Cup Holder Idea… Consider it Stolen!:bann: |
Re: Palf's 64 BBW Short Fleet
Sharp
|
Re: Palf's 64 BBW Short Fleet
Nice job making it yours
|
Re: Palf's 64 BBW Short Fleet
Great looking truck. Whats it got for drivetrain?
|
Re: Palf's 64 BBW Short Fleet
Quote:
|
Re: Palf's 64 BBW Short Fleet
Boy, that truck looks familiar? Lol!
|
Re: Palf's 64 BBW Short Fleet
Quote:
|
Re: Palf's 64 BBW Short Fleet
Lol!
|
Re: Palf's 64 BBW Short Fleet
Nice!!!
So is the square body gone now? |
Re: Palf's 64 BBW Short Fleet
that looks pretty sweet already!!! looking forward to seeing what you do with it
|
Re: Palf's 64 BBW Short Fleet
Quote:
|
Re: Palf's 64 BBW Short Fleet
Quote:
|
Re: Palf's 64 BBW Short Fleet
Very sharp looking truck, im partial to that body style also. Enjoy your ride.
|
Re: Palf's 64 BBW Short Fleet
Nice truck man , I have seen that cup mod before and I have always liked the way it looks
|
Re: Palf's 64 BBW Short Fleet
5 Attachment(s)
Other than driving it, this is about the only real thing I have done to it.
I made a new shifter knob out of a 5 hp Briggs & Stratton piston. I have been holding onto this since shortly after I got my 70 in 2002. Anyways, I cut the wrist pin, added a coupler nut, cleaned it up good and cleared coated it. After letting it dry a few days, I finally put it on this morning. I went and tested it out while I did some cruising around the coast. Drive on Folks! :chevy: |
Re: Palf's 64 BBW Short Fleet
Looks great. Have fun cruising.
|
Re: Palf's 64 BBW Short Fleet
Looks good Bill!
|
Re: Palf's 64 BBW Short Fleet
Very Nice!
|
Re: Palf's 64 BBW Short Fleet
Looks great.
|
All times are GMT -4. The time now is 08:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com