The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)
-   -   SBC stock head torque #'s? (https://67-72chevytrucks.com/vboard/showthread.php?t=245917)

Luba 06-18-2007 09:47 AM
SBC stock head torque #'s?
 
1 Attachment(s)
What is the torque # and pattern for stock iron heads on a sbc 350?

swb85 06-18-2007 10:59 AM
Re: SBC stock head torque #'s?
 
Nice motor!:)

65ft lbs, get there in increments (25-45-65)

Sequence:
http://www.boxwrench.net/specs/image...y_head_seq.gif

Orange 06-18-2007 11:55 AM
Re: SBC stock head torque #'s?
 
That works, but this is a good page as well...

http://torquespecs.xoompages.com/gmfs70-88chv8.htm

DLB

rage'nrat638 06-18-2007 03:09 PM
Re: SBC stock head torque #'s?
 
check here http://www.batauto.com/technical/sbchev.shtml

Luba 06-18-2007 03:13 PM
Re: SBC stock head torque #'s?
 
Thanks.

Billla 06-18-2007 03:36 PM
Re: SBC stock head torque #'s?
 
Just to be clear - these specs are from the factory manual and aren't correct for afternmarket fastners (ARP, etc.)

RACINJASON22 06-18-2007 04:07 PM
Re: SBC stock head torque #'s?
 
Quote:
Originally Posted by Billla (Post 2227973)
Just to be clear - these specs are from the factory manual and aren't correct for afternmarket fastners (ARP, etc.)
:agree: on the stock spec's follow the torque spec's from the head and or fastener if after market parts are used.

RJ22...:)


All times are GMT -4. The time now is 03:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com