S-10/ Blazer rear rotors
Does anyone have the dimensions on the rear rotors for the late '90's Blazers? I have a set of rotors that were part of a Baer Brakes kit for a full-size truck that they put together. Yeah, I know, two different vehicles, but supposedly this kit was put together with those particular rotors and I want to verify that fact. I used a different kit on my K1500 and I've had this one on the shelf. It's time to sell the parts and I need to identify them. (These were five lug rotors also...)
|
Re: S-10/ Blazer rear rotors
2 Attachment(s)
I took pics of these rotors I have. They are 11 5/8" or 295mm in dia. Thickness is 20mm and the height of the hat is 60mm. Depth of the hat is 54mm. The lug holes were drilled by Baer.
|
Re: S-10/ Blazer rear rotors
These may also fit '94-'96 Chevrolet Impalas (?).
|
Re: S-10/ Blazer rear rotors
Disc brakes came out in 98 for the blazer. 97 and earlier were drum.
98-05 2wd rear rotor: 296mm diameter, 20,mm thick, 72.8mm total height(so the hat would be 62.8mm tall) 98-05 4wd rear rotor: 295 mm diameter, 20mm thick, 95.3 mm total height(so the hat would be 75.3 mm tall) From the measurements you gave, they are close, but not a direct fit for a blazer. 94-96 Impala SS rear rotor: 295mm diameter, 20mm thick, 59.1 total height(so the hat would be 39.1mm) That's not a direct fit either |
Re: S-10/ Blazer rear rotors
Quote:
Thanks for that info. I think I "ballparked" that height measurement and I need to take that measurement again on a flat surface with my digital caliper. |
Re: S-10/ Blazer rear rotors
I think these are Impala rear disk rotors. Total height is approx. 60mm and thickness of the rotor is 20mm (39.1mm + 20mm). That math is close enough for me.
|
All times are GMT -4. The time now is 08:58 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com