The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Junkyard find (https://67-72chevytrucks.com/vboard/showthread.php?t=488856)

Richardwa 10-13-2011 07:41 PM

Junkyard find
 
Went to one of the local wrecking yards yesterday looking for parts for my 71 GMC. Didn't find much in the line of parts but this did follow me home: 71 GMC, 350/th350, don't know about the engine or trans yet although it does turn over.

It has an aftermarket electronic ignition that I need info on, it has a box on the fender that says Hays. ( see pics)

The only things I saw missing (so far) are power steering pump, brackets and hoses, the tailgate ashtray and the keys.

I think I got a pretty good deal at $750.00, if I'm lucky it may even run!

http://i253.photobucket.com/albums/h...s/HPIM1688.jpg

http://i253.photobucket.com/albums/h...s/HPIM1687.jpg

http://i253.photobucket.com/albums/h...s/HPIM1686.jpg

http://i253.photobucket.com/albums/h...s/hpim1684.jpg

str8axle55 10-13-2011 07:46 PM

Re: Junkyard find
 
Nice truck, I love it when cool stuff follows you home.

rsavage 10-13-2011 07:54 PM

Re: Junkyard find
 
If it is solid as it looks in the photos, it was a good deal. Congrats.

Rochlow 10-13-2011 08:00 PM

Re: Junkyard find
 
Nice find. There was a guy that was sell a running 69 for the price of scrap up here yesterday. Said if it didnt sell it was going to the crusher today.
Posted via Mobile Device

Richardwa 10-13-2011 08:05 PM

Re: Junkyard find
 
Quote:

Originally Posted by rsavage (Post 4951884)
If it is solid as it looks in the photos, it was a good deal. Congrats.

No rust in the cab at all, some minor rust in the right fender and a little surface rust here and there

Jerry Jones 10-13-2011 08:49 PM

Re: Junkyard find
 
That is great! NICE!

sjarrett71 10-13-2011 08:55 PM

Re: Junkyard find
 
The Hays box is more than likely an electronic trailer brake controller.

Congrats on the find! It looks solid!!

hugger6933 10-13-2011 09:02 PM

Re: Junkyard find
 
All is good when they follow you home, thing turn bad when they pass you on the way home!!!! real nice find there good luck and have some fun

71swb4x4 10-13-2011 09:12 PM

Re: Junkyard find
 
The Hays box is ignition. Here is an old Stinger catalog: http://rides.webshots.com/photo/2852...10270329bSZNYg

From what I have gathered Bill Hays sold his clutch business and started this electronic ignition company. He had to drop the Hays name right away because of his previous sales contract, so your Hays box is probably an early model. You will notice the boxes on the catalog look the same except they say Stinger rather than Hays.

LockDoc 10-13-2011 11:04 PM

Re: Junkyard find
 
1 Attachment(s)
-
There are two ways you can remedy the no keys situation. For a temp fix you can find an ignition switch that has the keys, unplug the connector from the back of the existing switch and plug the replacement one in and let it hang down under the dash. For a more permanent fix take the passengers door lock out and there should be a code number stamped on it (see pic below for sample) If there is and you take it to a full service locksmith he can cut you a key from the code number and it should fit the ignition. This only applies if none of the locks have been changed. Worth a try.

LockDoc

OARNGESI 10-14-2011 12:58 AM

Re: Junkyard find
 
Not a bad buy that truck would bring around 600 if you crush it you cant go wrong

Camaro_nut2001 10-14-2011 12:13 PM

Re: Junkyard find
 
Very nice score!! I wish the yards around here would sell complete vehicles.

lil hoodlum 10-14-2011 08:10 PM

Re: Junkyard find
 
I'm not sure about the engine being from a 1971 or at least the heads. Cylinder heads before 1969 did not come with accesory holes in them.

But I agree with everyone else, a couple of nice finds. I would love to have a new project like that 1971 GMC to work with.

Congrats!

Keith

bollybib 10-14-2011 09:49 PM

Re: Junkyard find
 
Quote:

Originally Posted by str8axle55 (Post 4951863)
Nice truck, I love it when cool stuff follows you home.

Well said.

Richardwa 10-14-2011 10:21 PM

Re: Junkyard find
 
Quote:

Originally Posted by lil hoodlum (Post 4953825)
I'm not sure about the engine being from a 1971 or at least the heads. Cylinder heads before 1969 did not come with accesory holes in them.

But I agree with everyone else, a couple of nice finds. I would love to have a new project like that 1971 GMC to work with.

Congrats!

Keith

The blue valve covers are what I noticed, also that they are on backwards, also the thermostat housing has a sending unit in it

Richardwa 10-14-2011 10:39 PM

Re: Junkyard find
 
Well heres an update on the truck:

Battery had about 50% charge, pulled the plug off back of ignition switch and used a couple of jumper wires.

Engine started and ran rough, #1 and 6 plug wires were reversed, fixed that after a little backfire that blew a hole in the exhaust pipe.

Running smoother now, no oil smoke

Burning really rich, no black smoke but can smell fuel, tried adjusting carb, didn't help much

ran it for a couple hours while messing with it, good oil pressure, no over heating or anything too bad.

The worst thing on the truck I found is no reverse, trans goes into forward gear fine and doesn't seem to slip, but nothing in reverse:waah:

The really bad thing is now my wife thinks I should sell my 92 GMC!:crazy:
I tried telling Her I have more into the running gear and wheels then I could get for it but She doesn't seem to sympathetic.........

lil hoodlum 10-14-2011 11:15 PM

Re: Junkyard find
 
Quote:

Originally Posted by Richardwa (Post 4954100)

The worst thing on the truck I found is no reverse, trans goes into forward gear fine and doesn't seem to slip, but nothing in reverse:waah:

The really bad thing is now my wife thinks I should sell my 92 GMC!:crazy:
I tried telling Her I have more into the running gear and wheels then I could get for it but She doesn't seem to sympathetic.........



Hey man! That's great you got the motor running! I've got a simple fix for the reverse not working. Never park it in front of something again!!!:lol: Use the pull through method.

But yeah, you might want to hold off on selling your 92 GMC for a little while.

Again congrats on your new project!

Keith

oldblue1968chevy 10-14-2011 11:16 PM

Re: Junkyard find
 
For the fuel issue-adj floats to spec (if u need help i find instructions/specs)

Still not right after that check/regulate your fuel pressure OR buy the edelbrock $100 fuel pump

Stock pump will put too much out and push the needle/seat apart and make it flood.

Start with float level/drop/clean carb then test fuel pressure with a good guage

rsavage 10-14-2011 11:58 PM

Re: Junkyard find
 
By the look of the casting mark on the front of them I think the heads are 58 and up 283 power pack heads. 1.72 intake, 1.5 exhaust with 59 cc chambers. Those heads were also used on 57-60 FI engines.

FleetsidePaul 10-15-2011 12:55 AM

Re: Junkyard find
 
Nice score!

Richardwa 10-15-2011 08:07 PM

Re: Junkyard find
 
Quote:

Originally Posted by oldblue1968chevy (Post 4954178)
For the fuel issue-adj floats to spec (if u need help i find instructions/specs)

Still not right after that check/regulate your fuel pressure OR buy the edelbrock $100 fuel pump

Stock pump will put too much out and push the needle/seat apart and make it flood.

Start with float level/drop/clean carb then test fuel pressure with a good guage

Thanks for that info, I will give it a try. If you could find the info that would help a lot, (never been into one of these carbs before).

If all else fails I have a double pumper on a wore out 305 around here somewhere.....might be a little too much carb though

Rob H. 10-15-2011 08:52 PM

Re: Junkyard find
 
Quote:

Originally Posted by Richardwa (Post 4954100)

The worst thing on the truck I found is no reverse, trans goes into forward gear fine and doesn't seem to slip, but nothing in reverse:waah:

Well now if we hooked your truck and my 67 together we'd be fine, mine won't go in forward gears, but does great in reverse! :lol:


All times are GMT -4. The time now is 12:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com