stepside custom tail lights
 

i wanna get rid of my "trailer light" tail lights on my stepside so give me ideas!!!

Re: stepside custom tail lights
 

top two are mine... the third one is another good idea!

Re: stepside custom tail lights
 

I have smoked LED Chevy Cobalt lights flush mounted in the Black Truck.
http://i42.photobucket.com/albums/e3...s/IMG_1583.jpg

http://i42.photobucket.com/albums/e3...s/CIMG6509.jpg

Re: stepside custom tail lights
 

I was thinking about some caddy lights mounted in the stake pockets. The shape seems about right but it would take some body work.

Re: stepside custom tail lights
 

I used the taillights off the 1955-1959 stepside truck to lose the big bug eyed taillamps. The Cobalt ones look very cool though,

Re: stepside custom tail lights
 

I'm building a custom length step side (aprox. 7ft) it ain't on the truck yet but here's what I did for my truck with the stock box and one I did for a customers '54
http://i1180.photobucket.com/albums/...708111712a.jpg
http://i1180.photobucket.com/albums/...526111548a.jpg

Re: stepside custom tail lights
 

My stepper bed has the earlier style dual lights on it. My feeling was circular lights up front, circular in the back too.

Re: stepside custom tail lights
 

here are mine, united pacific led lights, want something different for my current project

Re: stepside custom tail lights
 

i got a buddy that was thinking of doing somthing like this but upright on the steak post

Re: stepside custom tail lights
 

here are mine

Re: stepside custom tail lights
 

This is what i was going to do to my truck till i decided to go with the LED taillights

http://i205.photobucket.com/albums/b...y/IMGP0479.jpg

thanks
pat

Re: stepside custom tail lights
 

I used 41 Chevy LED lights on mine.

Re: stepside custom tail lights
 

Thats a nice clean setup, how are they wired? do they have have seperate leads for tail and brake/signals ?

Re: stepside custom tail lights
 

I am curious how the 60-66 chevy fleetside tail lights would look on a stepside bed they make all the parts for them and they have some options (LED,Covers,etc.)

Re: stepside custom tail lights
 

Drooling over a pair of these for my step side...

http://i.ebayimg.com/t/IRON-CROSS-LE...VFmg~~60_3.JPG

Re: stepside custom tail lights
 

I would like to do something like this on my truck. Do you have any pictures of when you were installing them? What lights did you use?

Re: stepside custom tail lights
 

I have those on my 50.......

Re: stepside custom tail lights
 

My fenders were cut for IH scout taillights in the 70s or 80s. Kind of Redneck, but maybe you like that? lol

http://a8.sphotos.ak.fbcdn.net/photo...411986_450.jpg

Re: stepside custom tail lights
 

just drilled a hole behind them, they have 3 wires, the red part of the light screws to the truck then the chrome covers hide them, I'm pretty sure they use the same led, for brake, tail just get brighter. then ran the license plate frame with clear led for a back up, and they are brighter then the original

th

Re: stepside custom tail lights
 

Do you by chance have a write up on the tail lights that exactly what I want to do!
Posted via Mobile Device

Re: stepside custom tail lights
 

Here's my 74 with 61 Chevy car taillights turned sideways.

Re: stepside custom tail lights
 

it was a hot rod tail light kit i found in the internet about 6 years ago it uses standard 2 filament bulbs and not led's. i don't have any pics of the install but it is easy. It came with the weld in plates and studs to weld in for the light buckets. I can get some pics of the back side of the lights if you would like.

Re: stepside custom tail lights
 

I like those! That's kinda what I was thinking at first for mine. I actually bought a pair of 68 Challenger tails, but later decided against them.

I don't really have a write-up on the Cobalt taillights, but I can just tell you what I did. I got a pair of them and a stick of steel rod. I sat on my garage floor for about an hour bending the rod into two hoops that fit the edge of the lights just how I wanted. Then I cut them and welded the ends together., traced them into the fenders, cut the holes out roughly, then welded the hoops into the fenders. Then I ground the holes smooth. Then I made a tripod basket sort of thing for each light, and welded bolts into the insides of the fenders to retain them. Filler, primer, paint, done! I also used some sticky foam weatherstripping around the leading edge of the lights to keep them snug in the holes without scraping the paint.

http://i42.photobucket.com/albums/e3...s/IMG_3373.jpg

I haven't wired the rear of the truck yet... And I just realized the foam has come loose.
http://i42.photobucket.com/albums/e3...s/IMG_3367.jpg

Here are the lights on ebay:
http://www.ebay.com/itm/05-07-COBALT...item20b8b5c66f

I bought these first, but went with the red ones instead and smoked them:
http://d3d71ba2asa5oz.cloudfront.net...ob05-led-c.jpg

Re: stepside custom tail lights
 

Hey, SeanPaintsFlames, you will probably need to build a splash guard over those lights. I made some for my 74 to weatherproof them since they were originally installed in the trunk panel of the car, otherwise they would short out real fast in a rainstorm. Right now I've got some made out of plastic coffee cans to keep them dry until I get a chance to make some steel covers.

Re: stepside custom tail lights
 

yessir. That's not a bad idea.