The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Alternate Tinkerings (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=140)
-   -   Mama's High School Grad Present-66' stang (https://67-72chevytrucks.com/vboard/showthread.php?t=399843)

67ChevyRedneck 08-06-2010 07:03 PM

Re: Mama's High School Grad Present-66' stang
 
This one has always made me smile:

http://www.camaroz28.com/forums/imag...s/freakout.gif

It's supposed to be for freaking out. I think it would fit well around here.

gcburdic 08-09-2010 09:26 AM

Re: Mama's High School Grad Present-66' stang
 
4 Attachment(s)
Pictures:D

gcburdic 08-09-2010 09:27 AM

Re: Mama's High School Grad Present-66' stang
 
4 Attachment(s)
more:D...sorry they are phone camera ones....little bit blurry!!!

gcburdic 08-09-2010 09:32 AM

Re: Mama's High School Grad Present-66' stang
 
My brother sent those photos this weekend because I will not be able to get there till this weekend!!!.....He said it's got all the original stuff on it still:metal: That 6 banger's got over 128,000 miles on it and sure needs a refresh....thinking of going to a 302:D
As you can tell the headliner is falling out and my bro said it smelled a little mildew-ey, so we must of been taking on water at some point:( Hope the floors aren't too bad....it has been a NC car all it's life though, so maybe nothing terrible!!! My parents stopped driving it in 1982, but we have lugged this 'stang everywhere we've moved over the past 20 years....and I am sure glad they did:lol:

Dad said he had it painted back in the 70's, but obviously it's strating to peel....my bro says only surface rust that he sees on the outside...we'll find out more when the disassemble starts......

my67chevytruck 08-09-2010 09:48 AM

Re: Mama's High School Grad Present-66' stang
 
Looks good Geoff!, hurry up and start the restore!

Bishops Trucks 08-09-2010 09:50 AM

Re: Mama's High School Grad Present-66' stang
 
I had a couple old Ponies, a '68 Coupe & a '69 Convertable. The 69 was my car as a senior in high school. I loved that thing.

67ChevyRedneck 08-09-2010 01:06 PM

Re: Mama's High School Grad Present-66' stang
 
Man, you suck. I think we should trade cars. I have more rust in one quarter than you have in the entire car!

gcburdic 08-09-2010 04:01 PM

Re: Mama's High School Grad Present-66' stang
 
Quote:

Originally Posted by my67chevytruck (Post 4129996)
Looks good Geoff!, hurry up and start the restore!

Maybe this weekend:D

Quote:

Originally Posted by 67ChevyRedneck (Post 4130284)
Man, you suck. I think we should trade cars. I have more rust in one quarter than you have in the entire car!

:lol: It's your fault I got started on this 'stang.....:lol: maybe we should trade???

Quote:

Originally Posted by Bishops Trucks (Post 4130000)
I had a couple old Ponies, a '68 Coupe & a '69 Convertable. The 69 was my car as a senior in high school. I loved that thing.

Thanks Bishops....

67ChevyRedneck 08-09-2010 09:14 PM

Re: Mama's High School Grad Present-66' stang
 
Quote:

Originally Posted by gcburdic (Post 4130559)

:lol: It's your fault I got started on this 'stang.....:lol: maybe we should trade???

I won't apologize for helping you save a deserving Mustang :D

And sure, I'm up for a trade, just ummmmm, send me progress pics so I can send them to my dad. It'll be a few years before he figures it out :D

gcburdic 08-14-2010 10:52 PM

Re: Mama's High School Grad Present-66' stang
 
5 Attachment(s)
Went up and started removing the interior to see just how bad it was....found lots of mice nests to start off with, but none of them stuck around for the restore:D
It's been an NC car all it's life, so things weren't too bad on the floor, kick panels, trunk area, and back seat areas....the roof had some surface rust too....the drivers door had some rust on the outside front corner and about midway back along the bottom outside lip....the driver side rear quarter has some rust through as well,,,,
Dad informed me that the car actually has 229,000 miles on it....yikes, but hey not real bad for over a quarter million miles!!!:metal:
Dad also gave me the protecto plate and owners manual showing where my Grandmother purchased the car for my Mom on 9-6-1966

gcburdic 08-14-2010 10:54 PM

Re: Mama's High School Grad Present-66' stang
 
5 Attachment(s)
And without the interior.....First three pics are the driver side floor front to back....last two are the interior roof

gcburdic 08-14-2010 11:00 PM

Re: Mama's High School Grad Present-66' stang
 
5 Attachment(s)
The first three pics are the passenger floor front to back....the front floor had several pinholes that we poked thru....gonna need a fix here....last 2 are the trunk area

gcburdic 08-14-2010 11:04 PM

Re: Mama's High School Grad Present-66' stang
 
5 Attachment(s)
Couple more....dash stripped.....driver side exterior rust....what we found in the trunk once opened, and the old vinyl trunk pad...mouse nest included!!!:D....it was pretty beat up.....

67ChevyRedneck 08-14-2010 11:40 PM

Re: Mama's High School Grad Present-66' stang
 
Yup, somebody's butt definitely bent the roof AND the brace!

Looks friggin great man. That's VERY minimal for those cars.

JohnC 08-15-2010 02:05 PM

Re: Mama's High School Grad Present-66' stang
 
Looks like a good start. Has a few hiccups, but nothing time and money won't fix. :lol:

gcburdic 08-15-2010 02:55 PM

Re: Mama's High School Grad Present-66' stang
 
Quote:

Originally Posted by 67ChevyRedneck (Post 4139673)
Yup, somebody's butt definitely bent the roof AND the brace!

Looks friggin great man. That's VERY minimal for those cars.

Wasn't me!!!...Promise:D

Quote:

Originally Posted by JohnC (Post 4140304)
Looks like a good start. Has a few hiccups, but nothing time and money won't fix. :lol:

I got the time....please send $$$$:lol:

67ChevyRedneck 08-16-2010 03:34 PM

Re: Mama's High School Grad Present-66' stang
 
So Geoff, when do you realistically think you'll start on the car?

I have to build a shed (NO room in the garage to work :( ) buy a compressor, welder, and rotisserie. I'm hoping this winter.

gcburdic 08-16-2010 09:51 PM

Re: Mama's High School Grad Present-66' stang
 
Quote:

Originally Posted by 67ChevyRedneck (Post 4142198)
So Geoff, when do you realistically think you'll start on the car?

I have to build a shed (NO room in the garage to work :( ) buy a compressor, welder, and rotisserie. I'm hoping this winter.

Ummm.....I've started man!!!:metal:.....it's on...little by little....hopefully my next move is finish getting everything out from behind the dash and doors, getting the front clip off, and removing the engine/ tranny.....
I think we are gonna try to do the passenger floor pan and rust encapsulate and seal the rest on the interior....it really isn't all that bad???....Or we might get it all blasted and primed to get a true assessment of what we are up against inside and out...can I borrow your rotisserie?:D

67ChevyRedneck 08-16-2010 10:08 PM

Re: Mama's High School Grad Present-66' stang
 
Sweet, I wasn't sure if you were just trying to get good pics or if it was "game on."

I'll probably get one in about 6 months... then my car will be on it for about... ohhhhhh, 2 years... you'll be done by then :lol:

gcburdic 08-16-2010 10:40 PM

Re: Mama's High School Grad Present-66' stang
 
Quote:

Originally Posted by 67ChevyRedneck (Post 4142885)
Sweet, I wasn't sure if you were just trying to get good pics or if it was "game on."

I'll probably get one in about 6 months... then my car will be on it for about... ohhhhhh, 2 years... you'll be done by then :lol:

Yeah man....although I didn't find myself too excited at first, after this past weekend, I cannot stop thinking about it:D

My brother knows a couple of mustang guys in town...we are going to talk to them about a rotisserie and engine/tranny combos too....

red69ss 08-18-2010 09:28 PM

Re: Mama's High School Grad Present-66' stang
 
cool car and history geoff. Its pretty solid and looks like the floor is solid other than pass. side, like you said maybe just clean and encapsulate . have you been under it ?these cars are known for rusting out in what I believe is called the torque box? or whatever they call them . anyway congrats and good luck with the project.

gcburdic 08-19-2010 09:51 AM

Re: Mama's High School Grad Present-66' stang
 
Thanks Dwayne....haven't been able to get the car on a lift yet (brother doesn't have power to it)...but we intend on checking it out under there too the next time I'm up there....yikes!!!...hoping it's not real bad!!!:D

gcburdic 09-12-2010 10:44 PM

Re: Mama's High School Grad Present-66' stang
 
4 Attachment(s)
Went up yesterday and removed the front fenders, hood, side trim, grill, etc....took some pics with the camera phone...not too good, but here they are....

Fenders were in great shape....just a small spot on the driver side under the trim piece, the battery apron/ box area was eaten up pretty bad, but was expected, the grill was in great shape, but the front valence was bent up and dented pretty bad...Dad says it was from a lady backing into him....bumper was junk (as you can see from previous pics).....

Next up is cleaning up the cowl (the Crazies at Ford don't give you any simple way to get in there....so we may have to "oil can" it to make sure they are ok...lots of leaves in there....hoping for the best (this could be a $2000+ repair if it is trashed!!!...YIKES!!!)...gotta get the engine and tranny out too....more to come

33shooter 09-12-2010 11:55 PM

Re: Mama's High School Grad Present-66' stang
 
My first "cool" car was a 66' Drop Top with a 4 speed, 289 and the pony interior. I miss that car dearly. An injected 5.0 will fit nicely inside that engine bay, and shouldn't break the bank. Remember, the 302/5.0 can be stroked out to 347 ci pretty easy....in case you just wanted the ole carb thing too. Being more of a Ford fan than Chevy fan (yeah, I know...I've never bought a Chevy, I'm here cause one was given to me) I love Mustangs. Very cool cars! From the drivers seat, the hood feels like you could land airplanes on it...

JohnC 09-13-2010 09:23 AM

Re: Mama's High School Grad Present-66' stang
 
Coming along nicely man. Keep it up.


All times are GMT -4. The time now is 05:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com