The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Power Steering Pulley Install? (https://67-72chevytrucks.com/vboard/showthread.php?t=786854)

Dodge68charger 05-14-2019 09:59 AM
Power Steering Pulley Install?
 
Do I Need a Special Tool To Install The Press On Power Steering Pulley or Can i use a Bolt and Washers to Tighten it Down? Thanks
Posted via Mobile Device

Big Kev-O 05-14-2019 11:42 AM
Re: Power Steering Pulley Install?
 
Mine went on with a bolt, only need the puller to take it off. I would make sure to use a grade 5 or even 8.

dondb 05-14-2019 12:10 PM
Re: Power Steering Pulley Install?
 
^ What he said:)

MARKDTN 05-14-2019 03:22 PM
Re: Power Steering Pulley Install?
 
The right tool goes a long way. But If I were going to do it without, I would put the pulley in the oven at maybe 275-300 for 20 min or so, and the pump in the freezer overnight. If you are fast, you might get it most of the way on without a puller tool kit.

franken 05-14-2019 07:33 PM
Re: Power Steering Pulley Install?
 
Considering the tool is free to borrow from a parts store, why risk damaging the pump or pulley?

Mike C 05-14-2019 09:30 PM
Re: Power Steering Pulley Install?
 
Harbor Freight has one for about $20. Buy it once and have it for the next project, no special trips required.


All times are GMT -4. The time now is 06:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com